Fix DLL Not Found or Missing on your Windows Computer

Sometimes, when you run a program, which was previously running smoothly, provides an error related to the .dll extension. An error message occurs which says DLL file not found or DLL file is missing. It creates a lot of problems for users as most people are not aware of what DLL file is, what it does and most importantly, how to handle this error. And they are unable to do anything because they panic as soon as they see the error message.

But don’t worry as after going through this article all your doubts regarding DLL files will be cleared, and you will also be able to fix DLL not found or missing error on Windows 10 without any issue.

Fix DLL Not Found or Missing on your Windows Computer

DLL: DLL stands for Dynamic-Link Library. It is Microsoft implementation of the shared library concept in the Microsoft Windows Operating Systems. These libraries have file extension .dll. These files are a core part of Windows and allow programs to run different functions without writing the whole program from scratch every time. Also, the code and data contained by these files can be used by more than one program at a time, making the working of the computer more efficient and reducing disk space as there is no need to keep duplicate files for each program.

How DLL Files Works?

Most of the applications are not complete in themselves, and they store their code in different files so that those files can also be used by some other applications. When the said application runs, the related file is loaded into the memory and used by the program. If the Operating System or Software does not find the related DLL file or if the related DLL file is corrupted, you will face the missing or not found error message.

Some of DLL files found in PC

Since DLL files are an important part of all the programs and are very common, they are often the source of errors. Troubleshooting of DLL files and its error is difficult to understand because one DLL file is associated with many programs. Therefore, you will need to follow each & every method to find the root cause of the error and fix its problem.

Fix DLL Not Found or Missing on your Windows Computer

Make sure to create a restore point just in case something goes wrong.

Note:  If you’re unable to access Windows normally due to DLL error, you may Enter Safe Mode to follow any of the below-listed methods.

Several ways are using which you can solve the problem of DLL missing or not found. Fixing a DLL error could take as long as one hour, depending on the problem’s error and cause. It takes a long time to solve the problem, but it is pretty easy to do so.

Below are the given ways by which you can solve the problem of DLL not found or missing. You can fix them, repair them, update them without downloading them from the Internet.

Method 1: Check For Updates

Sometimes a program does not run or shows such error because maybe your computer is missing a very crucial update. Sometimes, this problem can easily solve by just updating your software. To check if there are any updates available, follow the below steps:

1. Press Windows key or click on the Start button then click on the gear icon to open Settings.

Click on the Windows icon then click on the gear icon in the menu to open Settings

2. Click on Update & Security from the Settings window.

Press Windows Key + I to open Settings then click on Update & security icon

3. Now click on Check for Updates.

Check for Windows Updates | Fix Spacebar Not Working on Windows 10

4. Below screen will appear with updates available begin to download.

Check for Update Windows will start downloading updates | Fix DLL Not Found or Missing Error

After the downloading is complete, Install them, and your computer will become up-to-date. See if you’re able to Fix DLL Not Found or Missing Error, if not then continue with the next method.

Method 2: Restart Your Computer

It is possible that DLL error that is occurring is due to some files and temporarily and restarting of the computer may solve the problem without going any deep to resolve the problem. To restart the computer follow the below steps:

1. Click on the Start Menu and then click on the Power button available at bottom left corner.

Click on the Start Menu & then click on the Power button

2. Now click on Restart and your computer will restart itself.

Click on Restart and your computer will restart itself | Fix DLL Not Found or Missing Error

Method 3: Restore the deleted DLL from Recycle Bin

You may have accidentally deleted any DLL considering it as of no use as it is deleted and not available, so it is showing a missing error. So, simply restoring it from recycle bin can fix DLL Not Found or Missing Error. To restore deleted DLL file from recycle bin follow below steps:

1. Open the Recycle bin by clicking on the recycling bin icon present on the desktop or searching it using the search bar.

Open the Recycle bin | Fix DLL Not Found or Missing on your Windows Computer

2. Look for the DLL file you have deleted by mistake and right-click on it and select Restore.

Right-click on the DLL file deleted by mistake & select Restore

3. Your file will be restored at the same location from where you have deleted it.

Method 4: Run a Virus Or Malware Scan

Sometimes, some virus or malware may attack your computer, and your DLL file is damaged by it. So, by running a virus or malware scan of your whole system, you will get to know about the virus causing the problem to DLL file, and you can remove it easily. Therefore, you should scan your anti-virus software system and get rid of any unwanted malware or virus immediately.

Scan your System for Viruses | Fix DLL Not Found or Missing on your Windows Computer

Method 5: Use System Restore

DLL error can also occur due to any change made in the registry or other system configuration. Therefore, by restoring the changes, you have just made can help to resolve the DLL error. To Restore the current changes you have made, follow the below steps:

1. Type control in Windows Search then clicks on the “Control Panel” shortcut from the search result.

Type control panel in the search

2. Switch the ‘View by’ mode to ‘Small icons’.

Switch the View by mode to Small icons under Control Panel

3. Click on ‘Recovery’.

4. Click on ‘Open System Restore’ to undo recent system changes. Follow all the steps needed.

Click on ‘Open System Restore’ to undo recent system changes

5. Now, from the Restore system files and settings window click on Next.

Now from the Restore system files and settings window click on Next | Fix DLL Not Found or Missing Error

6. Select the restore point and make sure this restored point is created before facing the DLL Not Found or Missing Error.

Select the restore point

7. If you can’t find old restore points then checkmarkShow more restore points” and then select the restore point.

Checkmark Show more restore points then select the restore point

8. Click Next and then review all the settings you configured.

9. Finally, click Finish to start the restore process.

Review all the settings you configured and click Finish | Fix DLL Not Found or Missing Error

Method 6: Use System File Checker

System File Checker is the utility that identifies and restores corrupted files. It is the most potential solution. It involves the usage of the command prompt. To use System File Checker to solve the problem of DLL files follows the below steps:

1. Press Windows Key + X then select Command Prompt (Admin).

Command Prompt (Admin).

2. Enter the below command in command prompt and hit the enter button:

sfc /scannow

SFC scan now command prompt

3. Once the operation has completed, again enter the below command and hit the enter button.

DISM.exe /Online /Cleanup-image  /Restorehealth

DISM restore health system | Fix DLL Not Found or Missing on your Windows Computer

This may take some time. But once the above steps are completed, again run your program and this time most probably your DLL problem will be resolved.

If you’re still facing the issue, then you may also need to run Check Disk Scan. See if you’re able to fix DLL not found or missing error on your Windows Computer.

Method 7: Update System Drivers

If you’re still facing DLL errors, then the problem may be related to a particular piece of hardware, and you should update the appropriate drivers. For example, you see the error every time you plug in USB Mouse or Webcam then updating the Mouse or Webcam drivers may fix the issue. A high chance that the DLL error has been caused by faulty hardware or driver in your system. Updating and repairing the drivers for your hardware can help in fixing DLL Not Found or Missing Error.

Method 8: Clean Installation of Windows

Performing a clean installation of Windows can also solve this problem as a clean installation will remove everything from the hard drive and install a fresh copy of windows. For Windows 10, clean installation of Windows can be performed by resetting your PC. To Reset the PC follow below steps:

Note: This will delete all files & folders from your PC, so make sure you understand that.

1. Restart your PC by clicking on the power button then select Restart and at the same time press shift button.

Now press & hold the shift key on the keyboard and click on Restart

2. Now from the Choose an option window, click on Troubleshoot.

Choose an option at windows 10 advanced boot menu

3. Next click on Reset your PC under Troubleshooter screen.

Click on Reset your PC under Troubleshooter screen

4. You will be asked to choose an option from below files, select Remove everything.

You will be asked to choose an option from below files, select Remove everything

5. Click on Reset to reset the PC.

Click on Reset to Reset the PC

Your PC will start to reset. Once it resets completely, rerun your program, and your DLL error will be resolved.

Recommended:

I hope this article was helpful, and you can now easily Fix DLL Not Found or Missing on your Windows Computer, but if you still have any questions regarding this guide then feel free to ask them in the comment’s section.

Leave a Comment

Your email address will not be published. Required fields are marked *