How Do I Run TV Channel Auto Scan without Remote

All TV uses a set-top box and an antenna to broadcast channels or to make channels visible on your TV. In every country, there are almost all TV broadcasting service providers that offer some free channels which the users can watch. And these channels, if not visible, can be made visible by doing an auto-scan on your TV. If you are someone whose TV is continuously showing a message to run TV channel auto scan, this article will help you know why it is saying so and what it means. This article will also guide you in steps to know how do I run channel auto scan without remote and with remote on your TV from any manufacturer.

Table of Contents

How Do I Run TV Channel Auto Scan without Remote

Every TV is liable to perform an auto-scan without or with a TV remote. Doing an auto scan is a task that a TV user should perform to update all the available channels that your broadcaster is providing you. Sometimes, an auto scan might remove or add some channels to your TV. And this is totally dependent on the service provider and what channels they choose to add or remove from their plans. Read this article till the end to learn the steps demonstrating how to run TV channel auto scan in a detailed manner.

What Does It Mean When Your TV Says Please Run Channel Auto Scan?

When your TV says: Please run channel auto scan, it simply means that the channels that were available on your TV are removed. And in order to watch them, you need to do an auto scan.

Doing an auto scan will take hardly 5 minutes, and after that, all the TV channels will be visible to you on your TV. Sometimes, after an auto scan, you will get to see some more new channels on your TV which were not available previously. So, this is what does it means when your TV says please run tv channel auto scan.

Quick Answer

You can run channel auto scan on different TVs either by remote or manually, follow these steps to run auto scan without remote:

1. Press the Power button and then press the Source button to set the TV as source input.

2. Press the Menu button on the TV and go to the channel menu by pressing Volume+/- button.

3. Press the Channel- button and select the Auto Tuning option.

4. Using the Volume +/- buttons, select Yes and press the channel button to start the auto scan.

Why Does My RCA TV Says Please Run Channel Auto Scan?

Here are some reasons why does your RCA TV says please run channel auto scan:

Your RCA TV has been set to an incorrect source of input.
The antenna cable has not been attached correctly.
Your antenna might be got disturbed or its position has been changed due to wind.
Your TV hasn’t scanned for all the channels correctly.

Also Read: How to Clear Cache on Samsung TV

Can You Scan Channels without a Remote?

Yes, you can scan channels without a remote. Every TV, whether it is a smart TV or a normal TV, or even a monitor (which some people use as a TV), is manufactured in such a way that it can be operated without the use of a remote. For that hardware buttons or touch-sensing buttons are added to the TV using which the user can access all the functions and perform operations like brightness adjustment, auto scan, etc. These hardware buttons are manufactured so that if the remote gets broken or defective then the user can use the TV without a remote.

How Do I Run RCA Channel Auto Scan?

To know how do I run channel auto scan without remote and with remote on RCA TV, just follow the below-mentioned steps:

Note: Make sure that the antenna cable is plugged into your RCA TV.

Method 1: With Remote

1. Turn on your RCA TV.

2. Press the input button on your TV remote and select the TV as the input source.

3. Now, from the remote, press the Menu button.

4. Using the down arrow button, select the Channel option from the left pane and press the OK button.

Note: Make sure to set Signal Type to Air.

5. Choose the Auto Tuning option and press the OK button.

6. Select the Yes option and press the OK button to start the auto scan.

Now, let’s see how do I run channel auto scan without remote.

Also Read: How to Unlock Cable Box Channels

Method 2: Without Remote

1. Press the Power button from the back of your RCA TV to turn it on.

2. Press the Source button from the RCA TV and set the TV as source input.

3. Press the Menu button on the TV.

4. Using the Volume+/- button go to the Channel menu.

5. Press the Channel- button to get into the option.

6. Select the Auto Tuning option and press the channel– button.

7. Using the Volume +/- buttons, select Yes and press the channel button to start the auto scan.

Recommended:

We hope that you learned about how do I run channel auto scan without remote. Feel free to reach out to us with your queries and suggestions via the comments section below. Also, let us know what topic you want to learn about in our next article.