Fix Application Error 0xc0000142: Error 0xc0000142 can occur in any of the Windows versions and usually occurs when an application fails to properly initialize.The Application Error 0xc0000142 is a highly annoying and common error which affects a variety of core Windows applications. Whenever you try to run the program you will get this error:
The application was unable to start correctly (0xc0000142). Click OK to close the application.
Causes of Application Error 0xc0000142:
Application Error 0xc0000142 is caused by a malfunction or a corruption with the program you’re trying to use. Many people report seeing this error when trying to run “cmd.exe“ which is the DOS emulator program for your computer. Although this error does not specify the actual problem with the system or application in question, you can fix it using a standard method.
The most typical reason why the Application Error 0xc0000142 appears is down to corrupt or damaged files which the various applications you need use. These files are required for use by your computer and if they are damaged in any way, they’ll make your computer extremely unreliable and cause errors such as the 0xc0000142 error.
Recommended Solutions:
- Program called “Search Protect” or “SW booster” (try to Uninstall )
- Incorrectly switched reg key
- NVIDIA drivers (Update Or Reinstall )
- Corrupted C++ installation (Try to Reinstall C++)
- Install DirectX 11
- Install Microsoft .NET Framework
- Antivirus or Protection Packages ( Try to Disable Antivirus )
Fix Application Error 0xc0000142
Make sure to create a restore point just in case something goes wrong. Also, after trying each Method please check if you’re able to Fix Application Error 0xc0000142 or not.
Method 1: Uninstall Unkown Programs
Uninstall “Search Protect” or “SW Booster” or “Performance Optimizer.”
1.Open Windows Control Panel.
2.Select the installed program list
3.Choose and Uninstall “Search Protect.” Again check if you’re able to Fix Application Error 0xc0000142 or not.
Method 2: Change the value of LoadAppInit_DLLs
1.Open Run Command by Hold Window key and R Button Then Type “Regedit.”
2.Go To Following Location in registry editor:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion \Windows\LoadAppInit_DLLs
3.Double click LoadAppInit_DLLs and change the value from 1 to 0.
4.Click OK to confirm and exit. Now run Your Software or Game.
Method 3: Update Graphic Card Drivers
Upgrade the drivers for your graphics card from the NVIDIA website (or from your manufacturer’s website). If you have trouble updating your drivers click here for the fix.
Sometimes updating graphic card driver’s seems to Fix Application Error 0xc0000142 but if it doesn’t then continue to the next step.
Method 4: Download latest C++, DirectX and .NET Framework
If there is a C++ installation error, uninstall the C++ modules on the system and reinstall. Install DirectX 11 and Microsoft’s latest .NET Framework.
Download C++ from here.
Download DirectX 11 from here.
Download .NET Framework from here.
Download DirectX end-user runtime installer from here.
Method 5: Download All in One Runtimes (AIO)
Download and install AIO
This add-on integrates all important and current runtimes in a pack and offers a choice of what you want to install. Included are all the .NET Framework versions including hotfix.
Method 6: Run the Application in Compatibility Mode
Run the application in compatibility mode and always start the application as administrator.
1.Right click on file (giving application error 0xc0000142).
2.Click on Properties and then click Compatibility tab.
3.Click on “Run Compatibility Troubleshooter” if the games work save the settings if not continue.
4.Put a check mark on Run this program in compatibility mode for.
5.Select the operating system to which the driver is available.
6.Put a check mark on Run this program as an administrator under Privilege Level.
7.Click on Apply and then exit. Check again if you Fix Application Error 0xc0000142 or not.
Method 7: Run SFC (System File Checker)
Run sfc /scannow command so it scans all protected system files and replaces incorrect versions with correct Microsoft versions.
1.Right click on the Windows button.
2.Click on the Command Prompt(admin).
3.It will prompt so click on yes and the command prompt with admin rights will open.
4.Type sfc /scannow and wait for the process to finish.
You may also like:
- How to Fix VLC does not support UNDF Format
- Fix Your Computer Is Low On Memory Warning
- How to fix COM Surrogate has stopped working
- How to fix 0xc000007b Application Error
That’s it, all the above methods will help you Fix Application Error 0xc0000142 in no time but if they don’t work try this post (How to fix Games Application Error 0xc0000142). If you still have any query regarding this post feel free to let me know in the comment section.
hello thanks
i found it was because of kaspersky setting.
what settings in Kaspersky
is an anti-virus program.
Am faceing this problem on CHID OF LIGHT
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion \Windows\LoadAppInit_DLLs
I can’t find this reg Applnit DLLs after CurrentVersion
I have tried all the possible solutions still in vain
Am trying to run python v8 app on my win 7 ultimate but the same error keeps recurring
In one customer’s case it was because the Microsoft Click-To-Run service was busy upgrading Office 2016 in the background. Once that finished, all was well again.
(Bug on this website, my reply was on 10/3/2018, not two years ago 🙂 )
mines probably the same case, how will it take to be back again
I never thought upgrading my graphics drivers would fix it, but it did.
Solved my problem, thanks! You make a good work here!
i still have problem – some one help me plz. :((
sfc, system file checker LOL WTF 😀 thats the program that NEVER EVER repairs anything, basically just puts you and your machine sometimes in a several hours long waiting/idling, working your hard drive etc, that just DOES NOTHING. I strongly suspect thats just a bogus program made by MS to force you into a dead end path, give up and pay for professional help or OS upgrade. Tried that on several Win installs over the years and never helped, just like those official MS “hotfixes” or uninstallers, that give you a progress bar, supposedly “repairs” the registry, install tree etc, and do nothing, everything stays the same.
you really shoud stop recommending that kinda crap in 2018..
i got this error after login..after that a few second,this pc is shutting down.I try to login again.and this problem appear again and again..Please help me to solve this problem..
C++ worked for me. Thanks for your help.
i got this error after login..after that a few second,this pc is shutting down.I try to login again.and this problem appear again and again..Please help me to solve this problem
Getting an Error Message “An application is stopping Chrome from connecting”
No Work !
I got this error right after an MS “upgrade” on a program I’d been using just before the interruption, the FreeBASIC code editor (IDE). Win 10. None of the many advertised fixes have made any difference.
What exactly *is* the error. The 142 code stands for something. Nobody ever says what the error is, so all these non-solutions just amount to taking shots in the dark.