Home ยป How to

7 Ways to Fix Roku No Signal Issue

Blank screen on Roku should not stop you from all the entertainment!

When we talk about the most reliable media players and streaming services, Roku is one of the very popular names that provides users with access to a vast selection of content through its proprietary store. Well, everything is well & good, until you turn on your Roku device and the white light blinks, but when you try to stream Live TV on it, a message pops up on the screen that says No Signal. Now the question arises – what is this all about and how can fix it? 

Fix Roku No Signal Issue

Why Does Roku Say No Signal When I Turn It On & How to Fix It?

There could be several reasons behind your Roku TV having no signal on HDMI however, those can be resolved through simple methods. The following reasons might lead to Roku losing its signals:

  • Loose or faulty HDMI connection.
  • Weak internet connection.
  • Inadequate power supply.
  • Outdated software version.

Now that you know the possible causes behind the issue, let’s see how it can be fixed.

Quick Answer

To resolve this issue, restart the Roku device, reconnect all the plugs properly, and change the input source:

1. Press the Home button on the remote and go to Settings.

2. Select TV Inputs.

3. From the list of inputs, select HDMI 1, HDMI 2, or AV depending on in which port your cable is plugged in.

Method 1: Basic Troubleshooting

Usually, such issues are minor & temporary and can be easily fixed by some easy go-to solutions.

Method 1.1: Power Cycle Roku Device

Sometimes, when the device doesn’t boot up properly, it can cause problems with the signal and connectivity. However, when you power cycle and restart the device, the same can be fixed. 

1. Unplug the power cord of the Roku TV from the main outlet. 

2. Press and hold the power button on the TV for 30 seconds. Doing so will discharge the TV completely.

3. Plug the cord again into the outlet and power on the TV. 

Method 1.2: Unplug and Reconnect all Cables

If you notice that the white light on your Roku device is blinking but the TV is showing No Signal, it’s possible that the cable connecting the box to the TV isn’t properly connected. Unplug it, give the pin a good clean, and check for any signs of wear & tear or visible damage to the cable, as that could also cause issues with the signal.

Once you’ve inspected the cable, plug it back into the TV.  Just make sure that the cable is connected to the correct port, nice & snug. Also, check that the power adapter of the receiver is working fine and the outlet it is connected to is also functional.

Connect cable to the port

Method 1.3: Clean HDMI Port

Please check for any dust, debris, or lint build-up in the HDMI port, as well as signs of corrosion on the pin. Any presence of dirt particles can block the port from receiving signals, thereby leading to the discussed issue. Make sure to clean the port thoroughly and then plug the cable. If you notice that pins are corroded, it’s best to contact a technician and have them replaced. 

Method 2: Disable Auto Power Saving Mode on Roku

Roku devices come with an Auto Power Saving mode that allows it to switch to a low-power mode after 20 minutes of inactivity. As this consumes almost no bandwidth, it may be possible that there are no signal issues with Roku, but rather it is just sleeping. Press any button on the remote to wake up the device and then disable Auto Power Saving by following the steps below:

1. Press the Home button on the Roku remote.

2. In the home screen. scroll and select Settings, followed by System.

In the home screen. scroll and select Settings, followed by System.

3. Click on Power Settings and select Auto Power Savings.

4. Uncheck the After 20 minutes of no interaction option.

Uncheck the After 20 minutes of no interaction option.

Also Read: How to Turn Up Volume on Roku TV Without Using A Remote

Method 3: Change TV Input Source

It is important to check that the TV is set to the right input source where the receiver is connected. Follow the steps below:

1. Unplus all external devices connected to the TV set.

2. Press the Home button on the remote and select Settings.

Press Home on your Roku remote.

3. Click on TV inputs. Find and select the right input source – HDMI 1, HDMI 2, or AV in which your receiver cable is plugged in.

Method 4: Connect to a Different Port or Cable

If changing the input source did not help, we suggest you connect the cable to a different port on the TV as there are possibilities of the current port being faulty. If that does not help, change the cable. Replace the current HDMI cable with a new one and see if that fixes the No Signal issue on Roku.

HDMI cable

Method 5: Update Roku Software

Running on outdated software can also cause the Roku no signal issue on your TV, which is why we suggest you update the device. Follow the steps mentioned below:

1. Press the Home button on the Roku remote.

2. Open Settings and select System Update.

Note: The System update screen will show the info about current software and build versions, along with the date and time of the latest update.

3. Select Check now and wait for the device to check for updates and install it.

Press OK button on the remote and select Check now

Also Read: 21 Best Web Browsers for Your Roku Device

Method 6: Factory Reset Settings 

Resetting the factory reverts your TV to its default settings and erases your personal preferences. However, in case of a No signal issue, it can prove to be very effective. Here are the steps you need to follow for this process:

1. Navigate to the Settings menu and select System.

2. Click on Advanced system settings and select Factor reset from the right pane.

Click on Advanced system settings and select Factor reset from the right pane.

3. Follow the on-screen instructions and once it has been reset, check if Roku can receive the signal again.

Also Read: How Can You Log into Hulu on Roku

Method 7: Contact Support

Lastly, if none of the above-mentioned methods worked for you, you can contact the official Roku Support for more technical help and internal check, In case there is any form of internal damage to the receiver, they can fix it. 

Contact Roku Support

We hope that our guide helped you fix the No Signal issue on Roku. If you have any queries or suggestions for us, do let us know in the comments section below. Stay tuned to TechCult to find out solutions to any such tech-related issue.

About The Author

Leave a Comment

Your email address will not be published. Required fields are marked *