If you’re not able to access the internet and when you troubleshoot the issue you see an error message “Limited Access – No Internet access” on your WiFi or LAN network then this may be because of incorrect configuration, DNS issue, network adapter drivers are either outdated, corrupted or incompatible etc. There can be n number of causes as it really depends on user system configuration and environment, as each user has a different setup.
Well, let’s say there are many parameters that can cause such a problem, first being software updates or new installation which might change the registry value. Sometimes your PC can’t obtain IP or DNS address automatically while it can also be a driver issue. So without wasting any time let’s see How to Fix WiFi Connected but no Internet on Windows 10 issue with the help of the below-listed tutorial.
Table of Contents
[SOLVED] Fix WiFi Connected But No Internet on Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Restart your modem or router
Restart your modem and see if the issue is resolved as sometimes the network might have experienced some technical issues which can only be overcome by restarting your modem.
If the problem still doesn’t resolve, try to restart your PC as sometimes a normal Restart can fix the internet connectivity issue. So open Start Menu then click on Power icon and select restart. Wait for the system to reboot and then again try to access Windows Update or open Windows 10 Store App and see if you can fix this issue.
Method 2: Run Network Troubleshooter
1. Press Windows Key + I to open Settings then click on Update & Security.
2. From the left-hand menu, select Troubleshoot.
3. Under Troubleshoot, click on Internet Connections and then click Run the troubleshooter.
4. Follow the on-screen instructions to run the troubleshooter.
5. Reboot your PC to save changes and see if you’re able to Fix WiFi Connected But No Internet on Windows 10.
Method 3: Delete Temporary Files
Note: Make sure show hidden file and folders are checked and hide system protected files are unchecked.
1. Press Windows Key + R then type temp and hit Enter.
2. Select all the files by pressing Ctrl + A and then press Shift + Del to delete the files permanently.
3. Again press Windows Key + R then type %temp% and click OK.
4. Now select all the files and then press Shift + Del to delete the files permanently.
5. Press Windows Key + R then type prefetch and hit Enter.
6. Press Ctrl + A and permanently delete the files by pressing Shift + Del.
7. Reboot your PC and see if you have successfully deleted the temporary files.
Method 4: Use Google DNS
You can use Google’s DNS instead of the default DNS set by your Internet Service Provider or the network adapter manufacturer. This will ensure that the DNS your browser is using has nothing to do with the YouTube video not loading. To do so,
1. Right-click on the network (LAN) icon in the right end of the taskbar, and click on Open Network & Internet Settings.
2. In the settings app that opens, click on Change adapter options in the right pane.
3. Right-click on the network you want to configure, and click on Properties.
4. Click on Internet Protocol Version 4 (IPv4) in the list and then click on Properties.
5. Under the General tab, choose ‘Use the following DNS server addresses’ and put the following DNS addresses.
Preferred DNS Server: 22.214.171.124
Alternate DNS Server: 126.96.36.199
6. Finally, click OK at the bottom of the window to save changes.
7. Reboot your PC and once the system restart, see if you’re able to Fix WiFi Connected But No Internet on Windows 10.
Method 5: Reset TCP/IP
1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.
2. Now type the following command and press Enter after each one:
ipconfig /release ipconfig /flushdns ipconfig /renew
3. Again, open Admin Command Prompt and type the following and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip reset netsh winsock reset
4. Reboot to apply changes. Flushing DNS seems to Fix WiFi Connected But No Internet on Windows 10.
Method 6: Disable then Re-Enable Wireless Adapter
1. Press Windows Key + R then type ncpa.cpl and hit Enter.
2. Right-click on your wireless adapter and select Disable.
3. Again right-click on the same adapter and this time choose Enable.
4. Restart your and again try to connect to your wireless network and see if the issue is resolved or not.
Method 7: Uninstall Wireless drivers
1. Press Windows key + R, then type devmgmt.msc and hit Enter to open device manager.
2. Expand Network adapters and right-click on the Wireless network device.
3. Select Uninstall, if asked for confirmation select yes.
4. After uninstallation is complete click Action and then select ‘Scan for hardware changes.‘
5. The device manager will automatically install the wireless drivers.
6. Now look for a wireless network and establish a connection.
7. Open Network and Sharing Center and then click on ‘Change adapter settings.‘
8. Finally, right-click on your Wi-Fi connection and select Disable.
9. After a few minutes again Enable it.
10. Again try to connect to the Internet and see if you’re able to Fix WiFi Connected But No Internet on Windows 10.
Method 8: Obtain IP address and DNS server address automatically
1. Open Control Panel and click on Network and Internet.
2. Next, click Network and Sharing Center, then click on Change adapter settings.
3. Select your Wi-Fi then right-click on it and select Properties.
4. Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5. Checkmark “Obtain an IP address automatically” and “Obtain DNS server address automatically.”
6. Close everything, and you may be able to fix WiFi Connected But No Internet on Windows 10.
Method 9: Registry Fix
1. Press Windows key + R then type “regedit” and hit enter.
2. In Registry go to the following key:
3. Search for the key “EnableActiveProbing” and set its value to 1.
4. Finally, reboot and see if you’re able to Fix WiFi Connected But No Internet on Windows 10.
Method 10: Run CCleaner and Malwarebytes
1. Download and install CCleaner & Malwarebytes.
2. Run Malwarebytes and let it scan your system for harmful files. If malware is found, it will automatically remove them.
3. Now run CCleaner and select Custom Clean.
4. Under Custom Clean, select the Windows tab and checkmark defaults and click Analyze.
5. Once Analyze is complete, make sure you’re certain to remove the files to be deleted.
6. Finally, click on the Run Cleaner button and let CCleaner run its course.
7. To further clean your system, select the Registry tab, and ensure the following are checked:
8. Click on the Scan for Issues button and allow CCleaner to scan, then click on the Fix Selected Issues button.
9. When CCleaner asks “Do you want backup changes to the registry?” select Yes.
10. Once your backup has completed, click on the Fix All Selected Issues button.
11. Restart your PC to save changes.
- Fix Keyboard Not Typing in Windows 10 Issue
- How to Fix Windows 10 Mic Not Working Issue
- Fix GeForce Experience Won’t Open in Windows 10
- 3 Ways to Check Your Graphics Card in Windows 10
That’s it you have successfully learned How to Fix WiFi Connected But No Internet on Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.