It is indeed a fact that Gamers do not entertain interruptions as they immerse themselves fully in a game battle but, even popular gaming consoles are prone to technical issues. Oftentimes, these issues arise due to the wrong NAT type since it is a security measure that dismisses all outside connections. If this is the case with your console, then read on to learn how to change NAT type 3 to 2 on PS4, PS5, and Xbox.
How to Change NAT Type 3 to 2 on PS4, PS5 and Xbox One
If your NAT type is not correct, then your device can suffer from network connectivity issues and unusual lags. Worry not, we have multiple methods for you that will help you to change your NAT type on several gaming consoles including PS4, PS5, and Xbox One.
There are three methods through which you can change the NAT type:
Method 1: Enable UPnP on Your Router
Before jumping on the methods, you need to alter your router settings by following these steps:
1. Search for the default gateway IP address that you’ve noted down in your web browser.
Note: Follow the steps on our heading below How to Check Nat Type on PC below to check for default gateway IP address.
2. Enter your credentials to access your router.
3. Then, navigate to the ADVANCED option followed by Forwarding. Now, you can see UPnP.
Note: You can also find the UPnP section in some other tabs depending upon the router you use.
4. Click on Enable UPnP by checking the box next to it.
5. Click on Apply or Save. Your NAT Type will be changed.
Method 2: Put PS4 to DMZ
DMZ stands for demilitarized zone, a perimeter network that separates your local area network from untrusted traffic by adding an extra layer of security. Here are the steps to set up a DMZ:
1. Navigate to the DMZ settings in your router’s menu.
2. Enable DMZ and enter the previously noted IP address of your PS4. Save the changes you made.
3. Now. access the Settings on PS to check if the NAT type is changed.
Note: When you set up a DMZ for your gaming console, your device will be able to receive connections from the outside and might become vulnerable to intruders and data thefts.
Also Read: What is DMZ in Networking and Its Purpose?
Method 3: Use Port Forwarding
Port Forwarding is a safe and easy method to change the NAT type on PS4 without putting the security of your device at risk. Here’s how you can use port forwarding:
1. Locate the Forwarding Section and click on Virtual Servers.
2. Type the Port Numbers you want to forward in Service Port and Internal Port.
Sony has recommended the port numbers listed below for PS5:
- TCP: 80, 443, 3478, 3479, 3480
- UDP: 3478, 3479
For Xbox One, you can type this port number:
- UDP: 88, 500, 3544, 4500 and TCP and UDP ports: 3074
3. Now, click on Save.
4. Finally, reboot your router and run the game again. Your NAT type will be changed and you can go to enjoy the seamless gaming experience.
Can You Change the NAT Type Without Access to the Router PS4?
Changing the NAT type without access to the router is not possible as most of the configurations typically need to be made on the router itself.
However, if you don’t have physical access to it, you can still change the NAT type by logging in online, and from there you can follow the above-mentioned steps to complete the process.
Also Read: Fix NAT Type Failed on PS4
How to Check Nat Type on PC
NAT stands for Network Address Translation which translates the various private addresses of your network to a single public IP address. Meaning that the NAT is a mediator between your private network and the internet through the modem.
There are three NAT types:
- Open (NAT Type 1)
- Moderate (NAT Type 2)
- Strict (NAT Type 3)
You can easily check the NAT Type on your PC through your router settings. Follow these steps to see how:
1. Press Windows+R and open the Run dialog box. Enter CMD in the search bar and click OK.
2. Enter the command ipconfig in the terminal and hit Enter.
3. Go to Default Gateway and copy the number under it.
4. Enter the number into the address bar on any browser and Login into your network.
5. Now check the router’s settings for the NAT type.
Note: You might notice a distinct NAT settings option on your router, depending on its configuration. If you can see a Firewall setting, you might still be able to verify the exact NAT option if you can’t see it.
Your NAT type will be displayed at the bottom of the page along with your IP address which you’ll need if you want to change your NAT type.
How to Change NAT Type from Strict to Open on PC
You can directly make your NAT open through settings on your PC. Follow the steps below:
1. Go to your Settings, click on Network & internet, and click on Advanced network settings.
2. Click on Advanced sharing settings and then turn on toggle Network discovery.
Your NAT type will change from strict to open and become discoverable.
We hope that this article has helped you change NAT type 3 to 2 on PS4, PS5, and Xbox One.
Although these methods are effective, they might put your system’s security at risk so it is better to use advanced security software while performing them.
If you have any queries or suggestions, do let us know in the comments section. Stay tuned to TechCult for more informative guides.
