Fix Video TDR Failure (atikmpag.sys) in Windows 10

Fix Video TDR Failure (atikmpag.sys) in Windows 10

Fix Video TDR Failure (atikmpag.sys): If you’re facing Blue Screen of Death (BSOD) error with a STOP Code VIDEO_TDR_FAILURE then don’t worry as today we are going to see how to fix this issue. The main cause of this error seems to be faulty, outdated or corrupted graphics drivers. Now TDR in VIDEO_TDR_FAILURE stands for Timeout, Detection, and Recovery components of Windows. With further troubleshooting, you will find that this error is caused because of two files which are atikmpag.sys and nvlddmkm.sys in Windows 10.

Fix Video TDR Failure (atikmpag.sys) in Windows 10

If you have NVIDIA Graphic card then Video TDR Failure error is caused by nvlddmkm.sys or nvxdsync.exe file but if you have an AMD graphic card then this error is caused by atikmpag.sys file. If you have recently upgraded Windows or have manually downloaded the Graphic drivers then most probably you will face this error. Automatic Windows Update seems to download the incompatible drivers which cause this BSOD error. So without wasting any time let’s see How to Fix Video TDR Failure (atikmpag.sys) in Windows 10 with the help of the below-listed guide.

Fix Video TDR Failure (atikmpag.sys) in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Update AMD Graphic Card Driver

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

devmgmt.msc device manager

2.Now expand Display adapter and right click on your AMD card then select Update Driver.

Right-click on your AMD card then select Update Driver

3.On the next screen select Search automatically for the updated driver software.

search automatically for updated driver software

4.If no update is found then again right-click and select Update Driver.

5.This time choose “Browse my computer for driver software.

browse my computer for driver software

6.Next, click Let me pick from a list of available drivers on my computer.

Let me pick from a list of available drivers on my computer

7.Select your latest AMD driver from the list and finish the installation.

8.Reboot your PC to save changes.

Method 2: Re-install the driver in Safe Mode

1.Press Windows Key + R then type msconfig and hit Enter to open System Configuration.

msconfig

2.Switch to boot tab and check mark Safe Boot option.

uncheck safe boot option

3.Click Apply followed by OK.

4.Restart your PC and system will boot into Safe Mode automatically.

5.Again go to Device Manager and expand Display adapters.

uninstall AMD Radeon graphic card drivers

3.Right-click on your AMD Graphic card and select uninstall. Repeat this step for your Intel card.

4.If asked for confirmation choose OK.

select OK to delete the graphic drivers from your system

5.Reboot your PC into normal mode and install the latest version of the Intel chipset driver for your computer.

latest intel driver download

6.Again restart your PC then download the latest version of your Graphic card drivers from your manufacturer’s website.

Method 3: Install Old version of the driver

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

devmgmt.msc device manager

2.Now expand Display adapter and right click on your AMD card then select Update Driver.

Right-click on your AMD card then select Update Driver

3.This time choose Browse my computer for driver software.

browse my computer for driver software

4.Next, click Let me pick from a list of available drivers on my computer.

Let me pick from a list of available drivers on my computer

5.Select your old AMD drivers from the list and finish the installation.

6.Reboot your PC to save changes. This method should definitely Fix Video TDR Failure (atikmpag.sys) in Windows 10, but if you’re still stuck then continue with the next method.

Method 4: Rename atikmpag.sys or atikmdag.sys file

1.Navigate to the following path: C:\Windows\System32\drivers

atikmdag.sys file in System32 driversatikmdag.sys file in System32 drivers

2.Find the file atikmdag.sys and rename it to atikmdag.sys.old.

rename atikmdag.sys to atikmdag.sys.old

3.Go to ATI directory (C:\ATI) and find the file atikmdag.sy_ but if you’re not able to find this file then search in C: drive for this file.

find atikmdag.sy_ in your Windows

4.Copy the file to your desktop and press Windows Key + X then select Command Prompt (Admin).

command prompt admin

5.Type the following command in cmd and hit Enter after each one:

chdir C:\Users\[Your Username]\desktop
expand.exe atikmdag.sy_ atikmdag.sys

Note: If the above command didn’t work then try this one: expand -r atikmdag.sy_ atikmdag.sys

expand atikmdag.sy_ to atikmdag.sys using cmd

6.There should be atikmdag.sys file on your desktop, copy this file to the directory: C:\Windows\System32\Drivers.

7.Reboot your PC to save changes and see if this resolves the Video TDR Failure (atikmpag.sys) error.

Method 5: Clean Re-install Graphics Driver

1.Download and install Display Driver Uninstaller.

2.Launch Display Driver Uninstaller then click on Clean and Restart (Highly recommended).

Launch Display Driver Uninstaller then click on Clean and Restart (Highly recommended)

3.Once graphics driver is uninstalled, your PC will restart automatically to save changes.

4.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

devmgmt.msc device manager

5.From the Menu click on Action and then click on “Scan for hardware changes“.

Click on Action then click on Scan for hardware changes

6.Your PC will automatically install the latest Graphics driver available.

See if you’re able to Fix Video TDR Failure (atikmpag.sys) in Windows 10, if not then continue with the next method.

Method 6: Disable Intel HD Graphics driver

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

devmgmt.msc device manager

2.Expand Display adapters then right-click on Intel HD Graphics and select Disable.

Right-click on Intel HD Graphics and select Disable

3.Reboot your PC to save changes.

Recommended:

That’s it you have successfully Fix Video TDR Failure (atikmpag.sys) in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

Posted by

Aditya Farrad

Aditya is a skilled tech writer with 10 years of experience in the field. He has a strong background in Troubleshooting, and has a talent for simplifying complex technical concepts for a general audience. He has worked with a variety of clients in the technology industry, creating user manuals, technical documentation, and instructional materials. With his combination of technical knowledge and writing talent, he is able to create clear, accurate, and engaging content that helps users get the most out of their technology.

10 Comments

  1. I tried method 4 but the system can’t open input file

  2. I can’t even get Windows running before or after i have reset my Dell laptop.
    Is there any other way around it?

    1. Can you tell the exact error you facing or exact issue?

  3. Open “AMD Radeon Settings” -> “Gaming” -> “Global Settings” -> “Global WattMan”. Scroll down to “”Power Limit” Have it set to -20% an click “Apply” Thats would fix the overheating of my/your Graphic-Card “My Rx 590” will stop working boyond 83 degree. So that setting fixed my crashes at all!

    Please monitor your Temps with “Performance Monitoring” (AMD) NVIDIA has something similar i think.

  4. Thanks for the article it was easy to follow up…… I wish my PC will start working after all

  5. Make it simple as learned in internet. Open Local Machine Nvidia Graphic driver Write: TdrLevel value: 0 & and all your sorrows are gone. 🙂

  6. Hi.o have same problem but i can not switch on my pc .how can i fix it?

    I have sony vaio laptop

  7. Avatar photo Christopher Pasteurin

    Do I have to use the Intel chipset for the and e2 processor laptop

  8. ‘m facing with video code TDR failure and every time a tried to star my PC this message appear and says to restart so please help me to fix this because I can’t even access my PC so that I can be able to update the drivers

    1. you can open safe mode and disable your Display driver and restart i’m sure you can get access

Leave a Reply

Your email address will not be published. Required fields are marked *