Fix The Installation Failed In The First Boot Phase Error

Fix The Installation Failed In The First Boot Phase Error

Fix The Installation Failed In The First Boot Phase Error: If you are upgrading to Windows 10 or upgrading to a new major update from Microsoft then chances are the installation may fail and you will be left with an error message saying “We couldn’t install Windows 10.” If you look closely you will find some additional information at the bottom which would be an error code 0xC1900101 – 0x30018 or 0x80070004 – 0x3000D depending upon the type of error. So these are the following error which you can receive:

0x80070004 – 0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATE operation.

0xC1900101 – 0x30018
The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.

0xC1900101-0x30017
The installation failed in the FIRST_BOOT phase with an error during BOOT operation.

Fix The Installation Failed In The First Boot Phase Error

Now all the above errors are either caused due to incorrect registry configuration or due to device drivers conflict. Sometimes 3rd party software can also cause the above errors, so we need to troubleshoot the issue and fix the cause in order to resolve this error. So without wasting any time let’s see how to actually Fix The Installation Failed In The First Boot Phase Error with the help of below-listed troubleshooting guide.

Fix The Installation Failed In The First Boot Phase Error

Make sure to create a restore point just in case something goes wrong.

Note: Make sure to disconnect any external devices connected to PC.

Method 1: Temporarily Disable Antivirus and Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

Disable auto-protect to disable your Antivirus

2.Next, select the time frame for which the Antivirus will remain disabled.

select the duration until when the antivirus will be disabled

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to connect to the WiFi network and check if the error resolves or not.

4.Press Windows Key + I then select Control Panel.

control panel

5.Next, click on System and Security.

6.Then click on Windows Firewall.

click on Windows Firewall

7.Now from the left window pane click on Turn Windows Firewall on or off.

click Turn Windows Firewall on or off

8.Select Turn off Windows Firewall and restart your PC. Again try to open Google Chrome and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 2: Check for Windows Update

1.Press Windows Key + I then select Update & Security.

Update & security

2.Next, again click Check for updates and make sure to install any pending updates.

click check for updates under Windows Update

3.After the updates are installed reboot your PC and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 3: Run Official Windows Update Troubleshooter

If nothing works till now then you should definitely try running Windows Update Troubleshooter from Microsoft Website itself and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 4: Run Windows Update in Clean Boot

This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order Fix The Installation Failed In The First Boot Phase Error, you need to perform a clean boot in your PC and diagnose the issue step by step.

Perform Clean boot in Windows. Selective startup in system configuration

Method 5: Make sure you have enough Disc Space

In order to install Windows update/upgrade successfully, you will need at least 20GB of free space on your hard disk. It not likely that the update will consume all the space but it’s a good idea to free at least 20GB of space on your system drive in order for the installation to complete without any problems.

Make sure you have enough Disc Space in order install Windows Update

Method 6: Rename SoftwareDistribution Folder

1.Press Windows Key + X then select Command Prompt (Admin).

command prompt with admin rights

2.Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

Stop Windows update services wuauserv cryptSvc bits msiserver

3.Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

Rename SoftwareDistribution Folder

4.Finally, type the following command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Start Windows update services wuauserv cryptSvc bits msiserver

5.Reboot your PC to save changes.

Method 7: Registry Fix

1.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

Run command regedit

2.Navigate to the following registry key:

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\OSUpgrade

3.If you don’t find the OSUpgrade key then right-click on WindowsUpdate and select New > Key.

create a new key OSUpgrade in WindowsUpdate

4.Name this key as OSUpgrade and hit Enter.

5.Now make sure you have selected OSUpgrade and then in the right window pane right-click anywhere in the empty area and select New > DWORD (32-bit) value.

create new key allowOSUpgrade

6.Name this key as AllowOSUpgrade and double click on it to change it’s value to 1.

7.Again try to install the updates or re-run the upgrade process and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

Method 8: Delete a particular file messing with upgrade

1.Navigate to the following directory:

C:\Users\UserName\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Orbx

Delete Todo file under Orbx folder

Note: In order to see AppData folder you need to check mark show hidden files and folders from Folder Options.

2.Alternatively, you could press Windows Key + R then type %appdata%\Microsoft\Windows\Start Menu\Programs\Orbx and hit Enter to directly open AppData folder.

3.Now under Orbx folder, find a file called Todo, if the file exists make sure to permanently delete it.

4.Reboot your PC and again try the upgrade process.

Method 9: Update BIOS

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, an expert supervision is recommended.

1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.

msinfo32

2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.

bios details

3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.

4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.

Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.

5.Once the file is downloaded, just double-click on the Exe file to run it.

6.Finally, you have updated your BIOS and this may also Fix The Installation Failed In The First Boot Phase Error.

Method 10: Disable Secure Boot

1.Restart your PC.

2.When the system restart Enter the BIOS setup by pressing a key during the bootup sequence.

3.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.

Disable secure boot and try installing windows updates

#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.

4.Restart your PC and see if you’re able to Fix The Installation Failed In The First Boot Phase Error.

5.Again Enable the Secure Boot option from BIOS setup.

Method 11: Run CCleaner and Malwarebytes

1.Download and install CCleaner & Malwarebytes.

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

ccleaner cleaner settings

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

registry cleaner

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes and this would Fix The Installation Failed In The First Boot Phase Error, if not then continue with the next method.

Method 12: Run System File Checker and DISM Tool

1.Press Windows Key + X then click on Command Prompt(Admin).

command prompt with admin rights

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

SFC scan now command prompt

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

DISM restore health system

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes.

Method 13: Troubleshooting

1.Press Windows Key + X then select Command Prompt (Admin).

command prompt with admin rights

2.Type the following command into cmd as it (copy and paste it) and hit Enter after each one:

takeown /f C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log
icacls C:\$Windows.~BT\Sources\Panther\setuperr.log\setuperr.log /reset /T
notepad C:\$Windows.~BT\Sources\Panther\setuperr.log

Fix The Installation Failed In The First Boot Phase Error with these methods

3.Now navigate to the following directory:

C:\$Windows.~BT\Sources\Panther

Note: You need to check mark “Show hidden files and folders” and uncheck “Hide operating system files” in Folder Options in order to see the above folder.

4.Double click on the file setuperr.log, in order to open it.

5.The error file will have information like this:

2017-07-07 13:24:01, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadRegFromFile :: OpenFile error (C:\$WINDOWS.~BT\Work\MachineIndependent\Working\srcworking\agentmgr\CCSIAgent\005A4BDD\HKLM-E0xxxx04IME.reg) gle=2
2017-07-07 13:24:07, Error SP Error WRITE, 0x00000005 while gathering/applying object: File, C:\Windows\System32\Tasks [avast! Emergency Update]. Will return 0[gle=0x00000005]
2017-07-07 13:24:07, Error MIG Error 5 while applying object C:\Windows\System32\Tasks\avast! Emergency Update. Shell application requested abort[gle=0x00000005]
2017-07-07 13:24:07, Error [0x08097b] MIG Abandoning apply due to error for object: C:\Windows\System32\Tasks\avast! Emergency Update[gle=0x00000005]
2017-07-07 13:24:08, Error Apply failed. Last error: 0x00000000
2017-07-07 13:24:08, Error SP pSPDoOnlineApply: Apply operation failed. Error: 0x0000002C
2017-07-07 13:24:09, Error SP Apply: Migration phase failed. Result: 44
2017-07-07 13:24:09, Error SP Operation failed: OOBE boot apply. Error: 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed: 13. hr = 0x8007002C[gle=0x000000b7]
2017-07-07 13:24:09, Error SP Operation execution failed.[gle=0x000000b7]
2017-07-07 13:24:09, Error SP CSetupPlatformPrivate::Execute: Failed to deserialize/execute pre-OOBEBoot operations. Error: 0x8007002C[gle=0x000000b7]



2017-07-07 17:24:01, Error [SetupHost.Exe] ReAgentXMLParser::ParseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Drivers of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.GDRs of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.Langpacks of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-07 17:24:06, Error SP CInstallDUUpdatesOffline::FindOperation: No info found in section DynamicUpdate.FeaturesOnDemand of file C:\$Windows.~BT\Updates\Critical\SetupPlatform.ini[gle=0x00000002]
2017-07-08 13:30:12, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2017-07-08 13:30:19, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
2017-07-08 13:30:21, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2017-07-08 13:30:40, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2017-07-08 13:31:32, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2017-07-08 13:31:38, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2017-07-08 13:31:41, Error CSetupAutomation::Resurrect: File not found: C:\$Windows.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2017-07-08 13:31:41, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
2017-07-08 13:32:03, Error MOUPG CSetupHost::ReportEventW(1618): Result = 0x8024F005
2017-07-08 13:32:03, Error MOUPG SetupHost: Reporting pending reboot event failed: hr = [0x8024F005]
2017-07-08 13:32:03, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

6.Find out what is stopping the install, address it by uninstalling, disabling or updating and retry the installation.

7.In the above file if you will look closely the issue is created by Avast and hence uninstalling it fixed the issue.

Recommended for you:

That’s it you have successfully Fix The Installation Failed In The First Boot Phase Error but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.

Posted by
Aditya Farrad

Aditya is a self-motivated information technology professional and has been a technology writer for the last 7 years. He covers Internet services, mobile, Windows, software, and How-to guides.

7 Comments

  1. Thanks for sharing these advanced troubleshooting steps. As being Senior Escalations Engineer for Windows from last 2 years for Microsoft for Windows Support, I tried all the steps by researching and everything. I am going to try all these few new steps like app data files and other steps, let me see if that works, will update you about this. Before we don’t have any choice we were sending the cases to Level 3 Escalations or doing custom installation which was causing loss of applications and software’s of consumers.

    Best Regards
    Avi
    Microsoft Windows Escalations (Level-2)

  2. Worked thanks!!! this has been a problem with a handful of dell precision M2800 and i was running malwarebytes, i removed malwarebytes and disabled the firewall and it works.

    Thanks

    Thunder

  3. Greetings all,
    My problem has been much the same as everyone else’s…
    “0xC1900101 – 0x30018 WinX error code when upgrading from 1703 to 1809
    Failed during FIRST_BOOT phase, error during SYSPREP operation”
    This has been going on for every bit of over 1 year now … I have tried most everything anybody posts anywhere to try to fix this and finally be “upgraded” but alas, nothing has worked for me …
    My machine is an HP Envy 15t m6-p114dx, and I have not changed anything internal, I am wifi networking, nothing plugged in anywhere.
    ANY meaningful help will be gratefully appreciated.
    Here is my “setuperr.log” :
    ———-
    2019-04-03 19:56:06, Error CSI 00000001 (F) STATUS_OBJECT_NAME_NOT_FOUND #70# from Windows::Rtl::SystemImplementation::DirectRegistryProvider::SysQueryValueKey(flags = 0, key = bb4 (‘\REGISTRY\MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts’), vn = [l:21 ml:22]’Arial Nova (TrueType)’, kvic = 2, kvi = 2, disp = 0)[gle=0xd0000034]
    2019-04-03 19:56:06, Error CSI 00000002 (F) STATUS_OBJECT_NAME_NOT_FOUND #69# from Windows::Rtl::SystemImplementation::CKey::QueryValue(flags = 0, kn = [l:69]’\Registry\Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts\’, vn = [l:21 ml:22]’Arial Nova (TrueType)’, ic = KeyValuePartialInformation, info = {l:0 b:}, disp = 0)[gle=0xd0000034]
    2019-04-03 19:57:00, Error CONX 0xd0000034 Failed to add user mode driver [%SystemRoot%\system32\DRIVERS\UMDF\uicciso.dll]

    2019-04-03 19:57:58, Error CONX Windows::Compat::Appraiser::WicaApplicationInventory::AddItemProperty (514): App Inventory returned duplicate file c:\program files\samsung\allshare framework dms\1.3.23\allshareframeworkdms.exe.[gle=0x8007000d]
    2019-04-03 19:57:58, Error CONX Windows::Compat::Appraiser::WicaApplicationInventory::AddItemProperty (514): App Inventory returned duplicate file c:\program files (x86)\amd\performance profile client\auepmaster.exe.[gle=0x8007000d]
    2019-04-03 20:28:11, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:28:11, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:28:12, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:28:12, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:29:23, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:29:23, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:29:23, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:29:23, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:29:48, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
    2019-04-03 20:30:51, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:30:51, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:30:51, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:30:51, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:32:38, Error CSI 00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #3221# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = ‘(null)’, value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })
    [gle=0x80004005]
    2019-04-03 20:32:50, Error CSI 00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #71545# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = ‘(null)’, value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })
    [gle=0x80004005]
    2019-04-03 20:33:01, Error CSI 00000003 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #139869# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = ‘(null)’, value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })
    [gle=0x80004005]
    2019-04-03 20:33:11, Error CSI 00000004 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #209476# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = ‘(null)’, value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })
    [gle=0x80004005]
    2019-04-03 20:33:22, Error CSI 00000005 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #277800# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = ‘(null)’, value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })
    [gle=0x80004005]
    2019-04-03 20:33:33, Error CSI 00000006 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #346124# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = ‘(null)’, value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })
    [gle=0x80004005]
    2019-04-03 20:34:55, Error CSI 00000007 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #419376# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216, status = ‘(null)’, value = { type: 40972, bytes ( 32 ): 3f003a005c007000610067006500660069006c0065002e007300790073000000 })
    [gle=0x80004005]
    2019-04-03 20:35:15, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:35:16, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:35:16, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:35:16, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:40:26, Error [0x080a97] MIG HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches\Compress old files [] is not a valid registry value
    2019-04-03 20:47:20, Error MIG CMXEPlugin::StopTimedExecution: iismig.dll:Gather – plugin call timed out
    2019-04-03 20:47:20, Error [0x080389] MIG Failure while calling IDiscovery->Gather for Plugin={ServerPath=”Microsoft-Windows-IIS-RM\iismig.dll”, CLSID={A33259A7-E9DB-4195-A31F-57E3C4D74C49}, ThreadingModel=Apartment}. Error: 0x800705B4
    2019-04-03 20:47:20, Error SP Error READ, 0x000005B4 while gathering/applying object: pre-scan, Action,CMXEPlugin,C:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-IIS-RM\iismig.dll,{A33259A7-E9DB-4195-A31F-57E3C4D74C49},Apartment. Will return 2[gle=0x000000cb]
    2019-04-03 20:49:06, Error CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002]
    2019-04-03 20:49:06, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
    2019-04-03 20:59:46, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:59:46, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:59:47, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 20:59:47, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:00:31, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:00:31, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:00:31, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:00:31, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:04:07, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:04:08, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:04:08, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:04:08, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:04:33, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{C939EC0F-2F56-4CE8-AF56-2336596A5FA7} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
    2019-04-03 21:05:41, Error [0x08038b] MIG Failure while calling IPreApply->PreApply for Plugin={ServerPath=”Microsoft-Windows-IIS-RM\iismig.dll”, CLSID={A33259A7-E9DB-4195-A31F-57E3C4D74C49}, ThreadingModel=Apartment}. Error: 0xC00CEE01
    2019-04-03 21:05:41, Error SP Error READ, 0xC00CEE01 while gathering/applying object: pre-apply, Action,CMXEPlugin,C:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-IIS-RM\iismig.dll,{A33259A7-E9DB-4195-A31F-57E3C4D74C49},Apartment. Will return 2[gle=0x0000013d]
    2019-04-03 21:07:11, Error MIG Failed to check the certificate of the catalog file C:\WINDOWS\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\ntprint.cat.[gle=0x800b0100]
    2019-04-03 21:15:08, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey – fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2
    2019-04-03 21:15:08, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-04-03 21:15:08, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] onecoreuap\shell\propsys\schemacachehelpers.cpp(604)\shmig.dll!00007FF8D4C6D47E: (caller: 00007FF8D4C657C7) ReturnHr(1) tid(3a54) 80070002 The system cannot find the file specified.
    Msg:[Migrated key for Path $OFFLINE_RW_003ADB7E$SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\PropertySystem\PropertySchema.Migrated for 32-bit hive not found ]

    2019-04-03 21:15:08, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] shell\shmig\propsysschema.cpp(28)\shmig.dll!00007FF8D4C657DF: (caller: 00007FF8D4C652AA) LogHr(1) tid(3a54) 80070002 The system cannot find the file specified.

    2019-04-03 21:15:09, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: offline key (new) = ‘$OFFLINE_RW_003ADB7E$SYSTEM\Setup\Upgrade\Bridge’
    2019-04-03 21:15:09, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: ParseRegistryIfBridgeExists: query bridge presence key failed 0x139f, bridge present = 0
    2019-04-03 21:15:10, Error [0x08038d] MIG Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath=”Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll”, CLSID={43CCF250-2A74-48c6-9620-FC312EC475D6}, ThreadingModel=Apartment}. Error: 0x80070002
    2019-04-03 21:15:10, Error SP Error READ, 0x00000002 while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Sources\ReplacementManifests,Microsoft-Windows-DirectoryServices-ADAM-Client\adammigrate.dll,{43CCF250-2A74-48c6-9620-FC312EC475D6},Apartment. Will return 2[gle=0x000000cb]
    2019-04-03 21:15:42, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:15:42, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:15:42, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:15:42, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:16:13, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2019-04-03 21:16:13, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2019-04-03 21:16:13, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, {6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007e].
    2019-04-03 21:16:13, Error [0x080387] MIG Failure while calling IDiscovery->Discover for Plugin={ServerPath=”%windir%\system32\IasMigPlugin.dll”, CLSID={6df2d9df-1294-4637-82d3-d53761ca2c11}, ThreadingModel=Apartment}. Error: 0x8007007E
    2019-04-03 21:16:15, Error [0x0803eb] MIG Error: 3 Message: Error opening the key HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Explorer\KindMap: The system cannot find the path specified. [0x00000003]
    2019-04-03 21:16:15, Error [0x0803eb] MIG Error: 3 Message: Error opening the key HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Explorer\KindMap: The system cannot find the path specified. [0x00000003]
    2019-04-03 21:16:15, Error [0x0803eb] MIG Error: 3 Message: Error opening the key HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Explorer\KindMap: The system cannot find the path specified. [0x00000003]
    2019-04-03 21:16:15, Error [0x0803eb] MIG Error: 3 Message: Error opening the key HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Explorer\KindMap: The system cannot find the path specified. [0x00000003]
    2019-04-03 21:16:15, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2019-04-03 21:16:15, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2019-04-03 21:16:15, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, {6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007e].
    2019-04-03 21:16:15, Error [0x08038b] MIG Failure while calling IPreApply->PreApply for Plugin={ServerPath=”%windir%\system32\IasMigPlugin.dll”, CLSID={6df2d9df-1294-4637-82d3-d53761ca2c11}, ThreadingModel=Apartment}. Error: 0x8007007E
    2019-04-03 21:16:15, Error SP Error READ, 0x0000007E while gathering/applying object: pre-apply, Action,CMXEPlugin,C:\$WINDOWS.~BT\Work\MachineIndependent\Working\agentmgr\CCSIAgent,%windir%\system32\IasMigPlugin.dll,{6df2d9df-1294-4637-82d3-d53761ca2c11},Apartment. Will return 2[gle=0x000000cb]
    2019-04-03 21:16:47, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-feclient[@version=”10.0.15063.0″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:47, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-feclient[@version=”10.0.15063.0″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [EfsLocalConfig]. Will return 2
    2019-04-03 21:16:47, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-feclient[@version=”10.0.15063.0″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:47, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-feclient[@version=”10.0.15063.0″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [EfsLocalConfig]. Will return 2
    2019-04-03 21:16:47, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-TabletPC-CoreInkRecognition[@version=”10.0.15063.0″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:47, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-TabletPC-CoreInkRecognition[@version=”10.0.15063.0″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Dot3svc[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Dot3svc[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [ActiveHoursEnd]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [ActiveHoursStart]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [BranchReadinessLevel]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [DeferFeatureUpdatesPeriodInDays]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [DeferQualityUpdatesPeriodInDays]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [ExcludeWUDriversInQualityUpdate]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [LastToastAction]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [RestartNotificationsAllowed]. Will return 2
    2019-04-03 21:16:48, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft-Windows-Update-Ux-MusScnHandlers[@version=”10.0.15063.850″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [UxOption]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [ConfigVersion]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [EventMessageFile]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [ProviderGuid]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [TypesSupported]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [WinHttpSettings]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [ConfigVersion]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [EventMessageFile]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [ProviderGuid]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [TypesSupported]. Will return 2
    2019-04-03 21:16:50, Error SP Error WRITE, 0x0000065E while gathering/applying object: State, Microsoft.Windows.WinHTTP[@version=”5.1.15063.997″ and @arch=”amd64″ and @culture=”neutral” and @context=”allUsers”]/settings [WinHttpSettings]. Will return 2
    2019-04-03 21:17:25, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2019-04-03 21:17:25, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2019-04-03 21:17:25, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, {6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007e].
    2019-04-03 21:17:25, Error [0x08038d] MIG Failure while calling IPostApply->ApplySuccess for Plugin={ServerPath=”%windir%\system32\IasMigPlugin.dll”, CLSID={6df2d9df-1294-4637-82d3-d53761ca2c11}, ThreadingModel=Apartment}. Error: 0x8007007E
    2019-04-03 21:17:25, Error SP Error READ, 0x0000007E while gathering/applying object: apply-success, Action,CMXEPlugin,C:\$WINDOWS.~BT\Work\MachineIndependent\Working\agentmgr\CCSIAgent,%windir%\system32\IasMigPlugin.dll,{6df2d9df-1294-4637-82d3-d53761ca2c11},Apartment. Will return 2[gle=0x000000cb]
    2019-04-03 21:17:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!RemoveObsoleteCHSHKLMRegkey – fail to open regkey (software\Microsoft\CTF\TIP\{E429B25A-E5D3-4D1F-9BE3-0C608477E3A1}\LanguageProfile\0x00000804) = 2
    2019-04-03 21:17:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: TableTextServiceMig!ApplySuccess() remove HKLM Registries error
    2019-04-03 21:17:30, Error [0x08085f] MIG MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
    2019-04-03 21:17:30, Error [0x080863] MIG MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
    2019-04-03 21:17:30, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\NewOS\Windows\system32\IasMigPlugin.dll, {6DF2D9DF-1294-4637-82D3-D53761CA2C11}, 0) failed, hr=[0x8007007e].
    2019-04-03 21:17:30, Error [0x080390] MIG Failure while calling IPostApply->PostApply for Plugin={ServerPath=”%windir%\system32\IasMigPlugin.dll”, CLSID={6df2d9df-1294-4637-82d3-d53761ca2c11}, ThreadingModel=Apartment}. Error: 0x8007007E
    2019-04-03 21:17:30, Error SP Error READ, 0x0000007E while gathering/applying object: post-apply, Action,CMXEPlugin,C:\$WINDOWS.~BT\Work\MachineIndependent\Working\agentmgr\CCSIAgent,%windir%\system32\IasMigPlugin.dll,{6df2d9df-1294-4637-82d3-d53761ca2c11},Apartment. Will return 2[gle=0x000000cb]
    2019-04-03 21:41:54, Error MOUPG Finalize: Error reading narrator reg key: [0x80070002]
    2019-04-03 21:41:55, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:41:56, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:41:56, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\DefaultAppPool. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:41:57, Error [0x0803b6] MIG Can’t retrieve group information for user IIS APPPOOL\.NET v4.5 Classic. NetUserGetLocalGroups failed 0x000008AD
    2019-04-03 21:42:07, Error SP CFinalizeCriticalBoundary::DoExecute: Cannot create hardlink betweeen C:\$WINDOWS.~BT\Sources\UNBCL.DLL and C:\WINDOWS\System32\OOBE\SetupPlatform\UNBCL.DLL. Error: 0x80070050[gle=0x00000050]
    2019-04-03 21:42:07, Error SP CFinalizeCriticalBoundary::DoExecute: Rollback in system context will not be registered.[gle=0x00000050]
    2019-04-03 21:42:11, Error SP BFSVC: Error copying boot debugging files from C:\$WINDOWS.~BT\Sources\system32 to \\?\GLOBALROOT\Device\HarddiskVolume1\EFI\Microsoft\Boot (kd_*_*.dll). Last Error = 0x6[gle=0x00000006]
    2019-04-03 21:42:11, Error SP BFSVC: Error copying boot debugging files from C:\$WINDOWS.~BT\Sources\system32 to \\?\GLOBALROOT\Device\HarddiskVolume1\EFI\Microsoft\Boot (kdstub.dll). Last Error = 0x6[gle=0x00000006]
    2019-04-03 21:44:16, Error SP pGetExistingPageFiles: Failed to get PagingFiles value from ControlSet001\Control\Session Manager\Memory Management: 0x8007000d[gle=0x0000000d]
    2019-04-03 21:47:11, Error [SetupPlatform.exe] winreHashWimFile: Failed to hash [C:\WINDOWS\System32\Recovery]: 0x5
    2019-04-03 21:54:11, Error CBS Failed to load Session:3456_640921 [HRESULT = 0x80070002 – ERROR_FILE_NOT_FOUND]
    2019-04-03 21:54:36, Error CSI 00000043 (F) Done with generic command 14; CreateProcess returned 0, CPAW returned S_OK
    Process exit code 15 resulted in success? false
    Process output: [l:22 [22′[gle=0x80004005]
    2019-04-03 21:54:36, Error [0x018007] CSI 00000044 (F) Failed execution of queue item Installer: Generic Command ({81a34a10-4256-436a-89d6-794b97ca407c}) with HRESULT HRESULT_FROM_WIN32(14109). Failure will not be ignored: A rollback will be initiated after all the operations in the installer queue are completed; installer is reliable[gle=0x80004005]
    2019-04-03 21:55:44, Error CSI 00000297 (F) Generic Command ErrorCode: 80004005 Executable: iissetup.exe ExitCode: 15 Phase: 38 Mode: Install (first install) Component: Microsoft-Windows-IIS-Metabase-GC, Culture=neutral, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS[gle=0x80004005]
    2019-04-03 21:55:44, Error CSI 00000299@2019/4/4:01:55:44.518 (F) onecore\base\wcp\componentstore\com\advancedinstallerstore.cpp(580): Error HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED) originated in function Windows::COM::CComponentStore::IAdvancedInstallerAwareStore_ResolvePendingTransactions expression: HRESULT_FROM_WIN32(14099L)
    [gle=0x80004005]
    2019-04-03 21:55:44, Error CSI 0000029a (F) HRESULT_FROM_WIN32(ERROR_ADVANCED_INSTALLER_FAILED) #148# from Windows::COM::CComponentStore_IAdvancedInstallerAwareStore::ResolvePendingTransactions(dwFlags = (DontFailIfPrimitivesPending|IndicatePrimitiveRollback), Progress = NULL, Phase = 0, Disposition = (unknown enumerant 0)’ | ‘0)[gle=0x80073713]
    2019-04-03 21:55:44, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. [HRESULT = 0x80073713 – ERROR_ADVANCED_INSTALLER_FAILED]
    2019-04-03 21:55:44, Error [0x030149] CMI Callback_CBS_Do_OnlineInstall:Calling startup processing failed 0x80073713
    2019-04-03 21:55:44, Error [0x030153] CMI Callback_CMI_ConfigInstall: CBS startup processing failed.

    ———-

  4. I was able to avoid the “first boot phase” problem by locating the Windows install files on the C drive. Normally I keep install files on my D drive bcaz it has a lot more space. That apparently confused the installer.

  5. I dont know even which of these steps worked, but I did all of them and it finally allowed me to upgrade successfully to 1903… Thanks very much, was very close to formatting and starting again.

  6. Computer repair is my day task everyday and I am always using bits and pieces of the info contained in this layout, but must say this is the most detailed and best laid out info I have seen anywhere. Most time when you need to find something that you already know but just want to check again to make sure of the procedure is correct, searching it out is time consuming, reading through endless blogs, help sections, and comments that are not always to the point, nor correct and to many are just a come on to sell a useless product.

    Thanks for this creation and will have it marked for future reference…

  7. Thank you so much! For me Method 7, the registry key did the trick. I was upgrading a windows 7 machine to windows 10 and kept failing.

Leave a Reply

Your email address will not be published.