Home » Fix Right Click Not Working in Windows 10

Fix Right Click Not Working in Windows 10

Advertisement

Fix Right Click Not Working in Windows 10: If you have recently upgraded to Windows 10 or if you have updated your Windows to a newer build then chances are you might have faced this problem where the right click doesn’t work at all. The right-click context menu doesn’t appear, basically when you right-click nothing happens. You won’t be able to use right-click on any file or folder. Some users also reported that after they right-click the entire screen goes blank, the folder closes and all the icons automatically get arranged to the top left corner of the screen.

Advertisement

Fix Right Click Not Working in Windows 10

Now some users have reported that they were only able to right-click on “This PC” or Recycle bin. The main problem seems to be Windows Shell Extension, as sometimes 3rd party extensions can become corrupted and cause the right click not working issue. But it’s not limited to this, as the problem can also be due to outdated or incompatible graphic card drivers, corrupted system files, corrupted registry files, virus or malware etc. So without wasting any time let’s see how to Fix Right Click Not Working in Windows 10 with the help of the below-listed guide.

Fix Right Click Not Working in Windows 10

Make sure to create a restore point just in case something goes wrong.

Advertisement

Method 1: Run SFC and DISM

1.Press Windows Key + X then click on Command Prompt(Admin).

command prompt with admin rights

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)

SFC scan now command prompt

Advertisement

3.Wait for the above process to finish and once done restart your PC.

4.Again open cmd and type the following command and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

DISM restore health system

5.Let the DISM command run and wait for it to finish.

6. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

7.Reboot your PC to save changes and see if you’re able to Fix Right Click Not Working in Windows 10.

Method 2: Turn Off Tablet Mode

1.Press Windows Key + I to open Settings then click on System.

click on System

2.From the left-hand menu click on Tablet Mode.

3.Now from “When I sign in” drop-down select “Use desktop mode“.

Disable Tablet mode or select Use Desktop mode under When I sign in

4.Reboot your PC to save changes.

Method 3: Use ShellExView to disable problematic Extension

If you have a context menu which has a lot of 3rd party shell extensions then it’s possible that one of them may be corrupted and that’s why it’s causing the Right Click Not Working issue. Also, many shell extensions can all together cause the delay, so make sure to disable all the unnecessary shell extensions.

1.Download the program from here and then right-click on it and select Run as Administrator (you don’t need to install it).

right-click on Shexview.exe and select Run as Administrator

2.From the menu, click on Options then click on Filter by Extension Type and select Context Menu.

From Filter by extension type select Context Menu and click OK

3.On the next screen, you will see a list of entries, under these the entries marked with the pink background will be installed by 3rd parties software.

under these the entries marked with the pink background will be installed by 3rd parties software

4.Hold down CTRL Key and select all of the above entries marked with the pink background then click on the red button on the top left corner to disable.

Select all the item by holding CTRL and then disable selected items

5.Reboot your PC to save changes and see if you are able to Fix Right Click Not Working in Windows 10.

6.If the issue is resolved then it was definitely caused by one of the shell extension and in order find out which one was the culprit you could simply start enabling the extensions one by one until the issue occurs again.

7.Simply disable that particular extension and then uninstall the software associated with it.

8.Reboot your PC to save changes.

Method 4: Update Display Drivers

1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

devmgmt.msc device manager

2.Next, expand Display adapters and right-click on your Nvidia Graphic Card and select Enable.

right-click on your Nvidia Graphic Card and select Enable

3.Once you have done this again right-click on your graphic card and select “Update Driver Software.

update driver software in display adapters

Advertisement

4.Select “Search automatically for updated driver software” and let it finish the process.

search automatically for updated driver software

5.If the above step was able to fix your problem then very good, if not then continue.

6.Again select “Update Driver Software” but this time on the next screen select “Browse my computer for driver software.

browse my computer for driver software

7.Now select “Let me pick from a list of device drivers on my computer.”

let me pick from a list of device drivers on my computer

8.Finally, select the compatible driver from the list for your Nvidia Graphic Card and click Next.

9.Let the above process finish and restart your PC to save changes. After updating Graphic card you may be able to Fix Right Click Not Working in Windows 10.

Method 5: Run CCleaner and Malwarebytes

1.Download and install CCleaner & Malwarebytes.

Advertisement

2.Run Malwarebytes and let it scan your system for harmful files.

3.If malware is found it will automatically remove them.

4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:

ccleaner cleaner settings

5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.

6.To clean your system further select the Registry tab and ensure the following are checked:

registry cleaner

7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.

8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.

9.Once your backup has completed, select Fix All Selected Issues.

10.Restart your PC to save changes.

Method 6: Make sure Touchpad is working

Sometimes this problem can arise due to touchpad being disabled and this can happen by mistake, so it’s always a good idea to verify that this is not the case here. Different laptops have different combination to enable/disable the touchpad for example in my Dell laptop the combination is Fn + F3, in Lenovo it’s Fn + F8 etc.

Use the Function Keys to Check TouchPad

The touchpad is not working issue sometimes may occur because the touchpad may be disabled from BIOS. In order fix this issue you need to enable touchpad from BIOS. Boot your Windows and as soon as the Boot Screens comes up press F2 key or F8 or DEL.

Enable Toucpad from BIOS settings

Method 7: Enable Touchpad

1.Press Windows Key + I then select Devices.

click on System

2.Select Mouse & Touchpad from the left-hand menu and then click on Additional mouse options.

select Mouse & touchpad then click Additional mouse options

3.Now switch to the last tab in the Mouse Properties window and the name of this tab depends on the manufacturer such as Device Settings, Synaptics, or ELAN etc.

Advertisement

Switch to Device Settings select Synaptics TouchPad and click Enable

4.Next, click your device then click “Enable.

5.Reboot your PC to save changes.

This should Fix Right Click Not Working in Windows 10 issue but if you’re still experiencing the touchpad issues then continue with the next method.

Method 8: Update TouchPad/Mouse Driver

1.Press Windows Key + X then select Device Manager.

2.Expand Mice and other pointing devices.

3.Select your Mouse device in my case it’s Dell Touchpad and press Enter to open its Properties window.

Select your Mouse device in my case it's Dell Touchpad and press Enter to open its Properties window

4.Switch to Driver tab and click on Update Driver.

Switch to Driver tab and click on Update Driver

5.Now select Browse my computer for driver software.

browse my computer for driver software

6.Next, select Let me pick from a list of device drivers on my computer.

let me pick from a list of device drivers on my computer

7.Select PS/2 Compatible Mouse from the list and click Next.

Select PS 2 Compatible Mouse from the list and click Next

8.After the driver is installed restart your PC to save changes.

Method 9: Reinstall Mouse Drivers

1.Type control in Windows Search then click on Control Panel from the search results

Type control panel in the search

2.In device manager window, expand Mice and other pointing devices.

3.Right-click on your mouse/touchpad device and then select Uninstall.

right click on your Mouse device and select uninstall

4.If it asks for confirmation then select Yes.

5.Reboot your PC to save changes.

6.Windows will automatically install the default drivers for your Mouse and will Fix Right Click Not Working in Windows 10.

Method 10: Run System Restore

System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to Fix Right Click Not Working in Windows 10.

Open system restore

Recommended:

That’s it you have successfully Fix Right Click Not Working in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

1 thought on “Fix Right Click Not Working in Windows 10”

  1. Great detailed tutorial. My right click did not work immediately after install of Win 10. I went through your list, but could not do the sfc or the dism because command prompt simply would not come on, and also I could not right click on it to run as administrator. So I skipped those, turned off tablet mode (didn’t help) and then ran the shellexview. (However, you did say to right click and run as administrator, but the right click didn’t work of course. ) I ran it without that. After disabling all the “pink” entries, the right click came back, and the command prompt started to work. I did go ahead and run the sfc then, and all was ok there.
    So thank you, my issue is fixed!!!

Leave a Reply

Your email address will not be published. Required fields are marked *