Fix losing internet connection after installing Windows 10

Fix losing internet connection after installing Windows 10: If you have recently upgraded to Windows 10 then you may be experiencing a sudden loss of internet connection which is a major issue faced by Windows 10 users. Today we are going to discuss on how to fix Losing internet connection after installing Windows 10 and if you are one of the users facing this issue then this guide is for you. Now once you are facing limited connectivity on Wifi then you need to restart your PC or unplug then again plug in your Wifi Adapter in order to resolve this issue which is quite frustrating.

Fix losing internet connection after installing Windows 10

When the internet connection is limited you will see a yellow exclamation (!) sign on your WiFi icon on the system taskbar. When you will try to visit a webpage you will see a no internet connection error message and troubleshooting will not fix this issue. The only solution is to restart your PC in order to make the internet work again. The main issue seems to be corrupted Windows Socket API (winsock) which can cause this error but it’s not limited to this as there can be many other reasons. So without wasting any time let’s see how to actually fix the Losing internet connection issue with the below-listed troubleshooting guide.

Fix Losing internet connection after installing Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Reset Winsock and TCP/IP

1.Right-click on Windows Button and select “Command Prompt(Admin).

command prompt with admin rights

2.Again open Admin Command Prompt and type the following and hit enter after each one:

  • ipconfig /flushdns
  • nbtstat –r
  • netsh int ip reset
  • netsh winsock reset

resetting your TCP/IP and flushing your DNS.

3.Reboot to apply changes.Netsh Winsock Reset command seems to Fix losing internet connection after installing Windows 10.

Method 2: Update Network Adapter Drivers

1.Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open device manager.

devmgmt.msc device manager

2.Expand Network adapters, then right-click on your Wi-Fi controller (for example Broadcom or Intel) and select Update Driver Software.

Network adapters right click and update drivers

3.In the Update Driver Software Windows, select “Browse my computer for driver software.

Browse my computer for driver software

4.Now select “Let me pick from a list of device drivers on my computer.

Let me pick from a list of device drivers on my computer

5.Try to update drivers from the listed versions.

6.If the above didn’t work then go to manufacturers website to update drivers: https://downloadcenter.intel.com/

download driver from manufacturer's website

7.Install the latest driver from the manufacturer’s website and reboot your PC.

Method 3: Disable and Re-Enable Wifi Adapter

1.Press Windows Key + R then type ncpa.cpl and hit Enter.

ncpa.cpl to open wifi settings

2.Right-click on your wireless adapter and select Disable.

Disable the wifi which can't configure the ip

3.Again right-click on the same adapter and this time choose Enable.

Enable the Wifi to reassign the ip

4.Restart your and again try to connect to your wireless network and see if you’re able to Fix losing internet connection after installing Windows 10.

Method 4: Uncheck Power Saving Mode for WiFi

1.Press Windows Key + R then type devmgmt.msc and hit Enter.

devmgmt.msc device manager

2.Expand Network adapters then right-click on your installed network adapter and select Properties.

right click on your network adapter and select properties

3.Switch to Power Management Tab and make sure to uncheckAllow the computer to turn off this device to save power.

Uncheck Allow the computer to turn off this device to save power

4.Click Ok and close the Device Manager.

5.Now press Windows Key + I to open Settings then Click System > Power & Sleep.

in Power & sleep click Additional power settings

6.On the bottom click Additional power settings.

7.Now click “Change plan settings” next to the power plan which you use.

Change plan settings

8.At the bottom click on “Change advanced power settings.

Change advanced power settings

9.Expand Wireless Adapter Settings, then again expand Power Saving Mode.

10.Next, you will see two modes, ‘On battery’ and ‘Plugged in.’ Change both of them to Maximum Performance.

Set On battery and Plugged in option to Maximum Performance

11.Click Apply followed by Ok.

12.Reboot your PC to save changes. This would help to Fix losing internet connection after installing Windows 10 but there are other methods to try if this one fails to do its job.

Method 5: Flush DNS

1.Press Windows Keys + X then select “Command Prompt(Admin).

command prompt with admin rights

2.Now type the following command and press Enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew

ipconfig settings

3.Reboot your PC to save changes.

Method 6: Uncheck Proxy

1.Press Windows Key + R then type “inetcpl.cpl” and hit enter to open Internet Properties.

inetcpl.cpl to open internet properties

2.Next, Go to Connections tab and select LAN settings.

Lan settings in internet properties window

3.Uncheck Use a Proxy Server for your LAN and make sure “Automatically detect settings” is checked.

Uncheck Use a Proxy Server for your LAN

4.Click Ok then Apply and reboot your PC.

Method 7: Uninstall Network Adapter and then Restart

1.Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.

devmgmt.msc device manager

2.Expand Network Adapters and find your network adapter name.

3.Make sure you note down the adapter name just in case something goes wrong.

4.Right-click on your network adapter and uninstall it.

uninstall network adapter

5.If ask for confirmation select Yes.

6.Restart your PC and try to reconnect to your network.

7.If you’re not able to connect to your network then it means the driver software isn’t automatically installed.

8.Now you need to visit your manufacturer’s website and download the driver from there.

download driver from manufacturer's website

9.Install the driver and reboot your PC.

By reinstalling the network adapter, you should definitely Fix losing internet connection after installing Windows 10.

Method 8: Use Network Reset

1.Press Windows Key + I to open Settings then click on Network & Internet.

click on System

2.From the left window pane click on Status.

3.Scroll down to the bottom and click on Network reset.

Under Status click Network reset

4.On the next window click on Reset now.

Under Network reset click Reset now

5.If asks for confirmation select Yes.

6.Reboot your PC to save changes.

Recommended for you:

That’s it you have successfully Fix Losing internet connection after installing Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Leave a Comment

Your email address will not be published. Required fields are marked *