Home » Fix Ethernet Not Working in Windows 10 [SOLVED]

Fix Ethernet Not Working in Windows 10 [SOLVED]

Fix Ethernet Not Working in Windows 10: If you’re not able to access the internet via Ethernet cable, then you need to troubleshoot this issue. If you will open the Network and Sharing Center you will find that the PC doesn’t recognize the ethernet connection. But if you try to access the internet when connected over WiFi with the same connection then you will be able to browse the internet which means the problem may be caused because of incorrect network configuration, corrupt or outdated network drivers, damaged or faulty ethernet cable, hardware issues etc.

Fix Ethernet Not Working in Windows 10 [SOLVED]

Users who prefer Ethernet over WiFi are having a disaster because of this issue as they are not able to access the Internet via Ethernet cable. If you have updated or upgraded to Windows 10 then Ethernet not working in Windows 10 is a common issue. Thankfully there are a lot of fixes availbale which seems to fix this problem. So without wasting any time let’s see How to Fix Ethernet Not Working in Windows 10 with the help of the below-listed troubleshooting guide.

Fix Ethernet Not Working in Windows 10 [SOLVED]

Make sure to create a restore point just in case something goes wrong.

Before continuing, make sure to follow these basic steps to fix the problem:

  • Try to connect the ethernet cable to another port on the router, as chances are the particular port might be damaged.
  • Try to use another cable, as the cable itself might be damaged.
  • Try to unplug the cable then again reconnect.
  • Try to connect the ethernet to another PC to see if the problem is resolved. If the ethernet works on the other PC then your PC hardware might be damaged and you need to send it to repair.

Method 1: Run Network Troubleshooter

1.Press Windows Key + I to open Settings then click on Update & Security.

Press Windows Key + I to open Settings then click on Update & security icon

2.From the left-hand menu select Troubleshoot.

3.Under Troubleshoot click on Internet Connections and then click Run the troubleshooter.

Click on Internet Connections and then click Run the troubleshooter

4.Follow further on-screen instructions to run the troubleshooter.

5.Reboot your PC to save changes.

Method 2: Reset the Ethernet Adapter

1.Press Windows Key + I to open Settings then click on the Network & Internet icon.

Press Windows Key + I to open Settings then click on Network & Internet

2.From the left-hand menu click on Status.

3.Now under Status scroll down to bottom and click on Network reset link.

Under Status click Network reset

4.On the Network reset page, click on “Reset now” button.

Under Network reset click Reset now

5.Now again try to connect the Ethernet with PC and see if you’re able to Fix Ethernet Not Working in Windows 10.

Method 3: Enable Ethernet Device and Update Drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

devmgmt.msc device manager

2.Expand Network adapters, then right-click on your Ethernet device and select Enable.

Right-click on your Ethernet device and select Enable

Note: If it’s already enabled then skip this step.

3.Again right-click on it and select Update Driver.

Right-click on Realtek PCIe FE Family Controller and Update Driver.

4.Select “Search automatically for updated driver software” and let it automatically install any new drivers available.

search automatically for updated driver software

5.Reboot your PC to save changes and again check if you’re able to Fix Ethernet Not Working in Windows 10 or not.

6.If not, then again go to Device Manager, right-click on your Ethernet device and select Update Driver.

7.This time select “Browse my computer for driver software.

browse my computer for driver software

8.Now click “Let me pick from a list of available drivers on my computer.

Let me pick from a list of available drivers on my computer

9.Select the latest Realtek PCIe FE Family Controller driver and click Next.

Select the latest Realtek PCIe FE Family Controller driver and click Next

10.Let it install the new drivers and reboot your PC.

Method 4: Enable Ethernet Connection

1.Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.

ncpa.cpl to open wifi settings

2.Right-click on Ethernet connection and select Enable.

Right-click on Ethernet connection and select Enable

3.This will enable the Ethernet connection, again try to connect to the Ethernet network.

Method 5: Temporarily Disable Antivirus or Firewall

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

Disable auto-protect to disable your Antivirus

2.Next, select the time frame for which the Antivirus will remain disabled.

select the duration until when the antivirus will be disabled

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to access the Internet and check if the error resolves or not.

4.Type control in Windows Search then click on Control Panel from the search result.

Type control panel in the search

5.Next, click on System and Security and then click on Windows Firewall.

click on Windows Firewall

6.Now from the left window pane click on Turn Windows Firewall on or off.

click Turn Windows Firewall on or off

7.Select Turn off Windows Firewall and restart your PC. Again try to access the internet and see if you’re able to Fix Ethernet Not Working in Windows 10.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 6: Flush DNS and Reset TCP/IP

1.Right-click on Windows Button and select “Command Prompt(Admin).

command prompt with admin rights

2.Now type the following command and press Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

ipconfig settings

3.Again open Admin Command Prompt and type the following and hit enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
netsh winsock reset catalog
netsh int ipv4 reset reset.log

resetting your TCP/IP and flushing your DNS.

4.Reboot to apply changes. Flushing DNS seems to Fix Ethernet Not Working in Windows 10.

Method 7: Change Power Management Settings for Ethernet

1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

devmgmt.msc device manager

2.Expand Network adapters, then right-click on your Ethernet device and select Properties.

Right-click on your Ethernet device and select Properties

3.Switch to Power Management tab under the Ethernet Properties window.

4.Next, uncheckAllow the computer to turn off this device to save power“.

Uncheck Allow the computer to turn off this device to save power under Ethernet Properties

5.Click Apply followed by OK.

6.Reboot your PC to save changes.

Method 8: Use Google DNS

1.Open Control Panel and click on Network and Internet.

click Network and Internet then click View network status and tasks

2.Next, click Network and Sharing Center then click on Change adapter settings.

change adapter settings

3.Select your Wi-Fi then double click on it and select Properties.

Wifi properties

4.Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

Internet protocal version 4 (TCP IPv4)

5.Checkmark “Use the following DNS server addresses” and type the following:

Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4

use the following DNS server addresses in IPv4 settings

6.Close everything and you may be able to Fix Ethernet Not Working in Windows 10.

Recommended:

That’s it you have successfully Fix Ethernet Not Working in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

nv-author-image

Aditya Farrad

Aditya is a self-motivated information technology professional and has been a technology writer for the last 7 years. He covers Internet services, mobile, Windows, software, and How-to guides.

5 thoughts on “Fix Ethernet Not Working in Windows 10 [SOLVED]”

  1. I ‘m using Wired LAN Internet connection i connect LAN cable to motherboard network port but My PC doesn’t show any Network adapter and my motherboard network port only one light in on
    How to fix this…………………..

  2. my Ethernet port showing red light always even after connecting my Ethernet cable. in my adapter list there is only wireless adapter available no Ethernet adapter is there…what should i do??

  3. After all this any multiple other websites/articles still no fix -_-. No green light comes up on the router I tried all other ports I hooked it up the same way I have it to my computer with a laptop and it worked so its not the cable or the router. All my drivers are up to date and the ethernet is enabled and I have literally tried everything that this article and other have said to tried but still no fix… literally the only thing I can think off is resetting my pc I guess.

    1. I had the problem with no green light on the ethernet connection on the computer side. The computer did not see the connection. This is with a new computer. The older computers all work. Very strange! I finally fixed this by going from the router to an unmanaged ethernet network switch, and from the switch to the computer. This slows things down at the computer, but it works.

Leave a Reply

Your email address will not be published. Required fields are marked *