Fix Brightness issues after Windows 10 Creators Update

Fix Brightness issues after Windows 10 Creators Update: Many users are complaining about a new issue after downloading Windows 10 Creators Update which is their screen or display brightness is automatically reset to the default value after each reboot. Particularly the screen brightness is adjusted to 50% of the current value after each restart. Basically, Windows forgets the display settings and you need to manually set it every time you restart your PC.

Fix Brightness issues after Windows 10 Creators Update

Just to clarify the issue is not related to “Night Mode” which is a popular feature in the creator updates. Now, this has been an annoying issue for all the Windows 10 users and so without wasting any time let’s see how to actually Fix Brightness issues after Windows 10 Creators Update with the help of below-listed troubleshooting guide.

Fix Brightness issues after Windows 10 Creators Update

Make sure to create a restore point just in case something goes wrong.

Method 1: Disable Automatic Brightness Reset Task

1.Press Windows Key + R then type Taskschd.msc and hit Enter to open Task Scheduler.

press Windows Key + R then type Taskschd.msc and hit Enter to open Task Scheduler

2.Now from the left-hand window pane, navigate to the following path:

Task Scheduler Library > Microsoft > Windows > Display > Brightness

3.Make sure you have highlighted Brightness in the left window pane and then in the right window double click on BrightnessReset to open its Properties.

BrightnessReset

4.Switch to Trigger tab and click on the “At log on” trigger to select it and then click on Edit.

5.On the next screen, make sure to uncheck “Enabled” checkbox and click OK.

Switch to Trigger tab and edit At log on trigger and uncheck Enabled

6.Close Task Scheduler and set the screen brightness according to your needs and reboot your PC.

Method 2: Update Graphic Card Drivers

1.Press Windows Key + R and in the dialog box type “dxdiag” and hit enter.

dxdiag command

2.After that search for the display tab (there will be two display tabs one for the integrated graphic card and another one will be of Nvidia’s) click on the display tab and find out your graphic card.

DiretX diagnostic tool

3.Now go to the Nvidia driver download website and enter the product details which we just find out.

4.Search your drivers after inputting the information, click Agree and download the drivers.

NVIDIA driver downloads

5.After successful download, install the driver and you have successfully updated your Nvidia drivers manually.

Method 3: Update Display Drivers

1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

devmgmt.msc device manager

2.Next, expand Display adapters and right-click on your Nvidia Graphic Card and select Enable.

right-click on your Nvidia Graphic Card and select Enable

3.Once you have done this again right-click on your graphic card and select “Update Driver Software.

update driver software in display adapters

4.Select “Search automatically for updated driver software” and let it finish the process.

search automatically for updated driver software

5.If the above step was able to fix your problem then very good, if not then continue.

6.Again select “Update Driver Software” but this time on the next screen select “Browse my computer for driver software.

browse my computer for driver software

7.Now select “Let me pick from a list of device drivers on my computer.”

let me pick from a list of device drivers on my computer

8.Finally, select the compatible driver from the list for your Nvidia Graphic Card and click Next.

9.Let the above process finish and restart your PC to save changes. After updating the Graphic card driver you may be able to Fix Brightness issues after Windows 10 Creators Update..

Method 4: Perform Clean Boot

Sometimes 3rd party software can conflict with Windows and can cause brightness issues. In order to Fix Brightness issues after Windows 10 Creators Update, you need to perform a clean boot in your PC and diagnose the issue step by step.

Perform Clean boot in Windows. Selective startup in system configuration

Recommended for you:

That’s it you have successfully Fix Brightness issues after Windows 10 Creators Update but if you still have any queries regarding this post feel free to ask them in the comment’s section.

2 thoughts on “Fix Brightness issues after Windows 10 Creators Update”

  1. “Resets display brightness to an optimal level……. and enables changing brightness automatically when lighting changes.”

    Sounds very stupid to me and absolutely no consideration for user preference.

    What if the user doesn’t want their brightness to change automatically or go to an “optimal level” where it may blind them excessively or every time it does that?

    For automatic brightness to work for me I’d want a setting to adjust the ambient light to the brightness levels and the thresholds.

    I thought that could have been the case but it isn’t in the task scheduler yet. I am using Enterprise LTSC and there is something triggering it now and again. Thanks for the article and I’ll be waiting to check for that incase it comes later in the future updates.

  2. I found the culprit It was this key:
    Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DisplayEnhancementService
    DWORD “UserBrightnessSettingPercent”
    Value 19 (DATA 25)
    Everytime I’d change previously something in Group policy editor it would default back to 50%
    Now it still does it but to the 25% that I set.

    DisplayEnhancementService no setting for that in Pc settings and the the permissions are to deny the administrators and users so had to change that to set my own values. What a joke.

Leave a Comment

Your email address will not be published. Required fields are marked *