Fix Selected boot image did not authenticate error: If you are facing this error message “Fix Selected boot image did not authenticate” then your PC is not able to load BIOS properly and the main cause of this error seems to be Secure Boot. The boot sequence is saved into the database and a violation of it seems to lead to this error message. This error can also be caused due to corrupted or incorrect BCD (Boot Configuration Data) configuration.
Now if you click OK, the PC will restart and you will again be back on this error message. So without wasting any time let’s see how to actually Fix Selected boot image did not authenticate error with the help of below-listed troubleshooting guide.
Table of Contents
[FIXED] Selected boot image did not authenticate error
Method 1: Switch to Legacy Boot in BIOS
1.Boot into BIOS, when the computer starts repeatedly press F10 or DEL to enter into BIOS setup.
2.Now get into System Configuration then find Legacy Support.
3.Enable Legacy support using the arrow keys and pressing Enter.
4.Then make sure Secure boot is disabled, if not then disable it.
5.Save changes and exit BIOS.
6.Reboot your PC and see if you’re able to Fix Selected boot image did not authenticate error, if not then continue.
Method 2: Perform Hard Reset
1.Turn off your PC completely and remove the power cord.
2.Remove the battery from the back of your PC.
3.Hold power button for 20-30 seconds in order to perform a hard reset.
4.Again put your battery and connect the AC power cord.
5.Restart your PC and see if you’re able to fix the issue.
Method 3: Load Default BIOS Configuration
1.Turn off your laptop, then turn it on and simultaneously press F2, DEL or F12 (depending on your manufacturer) to enter into BIOS setup.
2.Now you’ll need to find the reset option to load the default configuration and it may be named as Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS will now use its default settings.
4.Once you’re logged into Windows see if the issue with the charging is resolved or not.
Method 4: Run Automatic Repair
1.Insert the Windows 10 bootable installation DVD and restart your PC.
2.When prompted to Press any key to boot from CD or DVD, press any key to continue.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart and you have successfully Fix Selected boot image did not authenticate error, if not, continue.
Method 5: Run Hardware Diagnostics
If you are still not able to Fix Selected boot image did not authenticate error then chances are your hard disk might be failing. In this case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace the Hard Disk or not. But instead of hard disk, it’s possible that any other hardware might be also failing such as memory or notebook panel etc.
To run Diagnostics restart your PC and as the computer starts (before the boot screen), press F12 key and when the Boot menu appears, highlight the Boot to Utility Partition option or the Diagnostics option and press enter to start the Diagnostics. This will automatically check all the hardware of your system and will report back if any issue is found.
- Fix Windows Installer Access Denied Error
- Remove Administrative Tools in Windows 10
- Fix Broken Task Scheduler in Windows 10
- Fix Volume icon missing from Taskbar in Windows 10
That’s it you have successfully Fix Selected boot image did not authenticate error if you still have any questions regarding this post then feel free to ask them in the comment’s section.