Fix Clock Watchdog Timeout Error on Windows 10: While playing a video game, your PC might suddenly restart and you may face Blue Screen of Death (BSOD) with error message CLOCK_WATCHDOG_TIMEOUT. You can also face this error when trying to run a clean installation of Windows 10. Once you face the CLOCK_WATCHDOG_TIMEOUT error, your PC will freeze and you will have to force restart your PC.
You may face the Clock Watchdog Timeout Error on Windows 10 because of the following reasons:
- You may have overclocked your PC hardware
- Damaged RAM
- Corrupted or outdated Graphic Card drivers
- Incorrect BIOS configuration
- Corrupted System files
- Damaged Hard Disk
According to Microsoft, the CLOCK_WATCHDOG_TIMEOUT error indicates that an expected clock interrupt on a secondary processor, in a multi-processor system, was not received within the allocated interval. Anyway, without wasting any time let’s see How to Fix Clock Watchdog Timeout Error on Windows 10 with the help of the below-listed tutorial.
Table of Contents
Fix Clock Watchdog Timeout Error on Windows 10
Make sure to create a restore point just in case something goes wrong.
Note: Before continuing with below steps, make sure you:
A.Disconnect all USB devices connected to your PC.
B.If you’re overclocking your PC then make sure you don’t and see if this fixes the issue.
C.Make sure that your computer doesn’t overheat. If it does, then this might be the cause of the Clock Watchdog Timeout Error.
D.Make sure you haven’t changed your software or hardware recently, for example, if you have added extra RAM or installed a new graphics card then maybe this is the reason for BSOD error, simply remove recently installed hardware and uninstall the device software from your PC and see if this fixes the issue.
Method 1: Run Windows Update
1.Press Windows Key + I and then select Update & Security.
2.Then under Update status click on “Check for updates.“
3.If an update is found for your PC, install the update and reboot your PC.
Method 2: Temporarily Disable Antivirus and Firewall
1.Right-click on the Antivirus Program icon from the system tray and select Disable.
2.Next, select the time frame for which the Antivirus will remain disabled.
Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.
3.Once done, again try to start the app or program and check if the error resolves or not.
4.Press Windows Key + R then type control and hit Enter to open Control Panel.
5.Next, click on System and Security.
6.Then click on Windows Firewall.
7.Now from the left window pane click on Turn Windows Firewall on or off.
8.Select Turn off Windows Firewall and restart your PC. Again try to start the program and see if you’re able to Fix Clock Watchdog Timeout Error on Windows 10.
Method 3: Reset BIOS to default settings
1.Turn off your laptop, then turn it on and simultaneously press F2, DEL or F12 (depending on your manufacturer) to enter into BIOS setup.
2.Now you’ll need to find the reset option to load the default configuration and it may be named as Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS will now use its default settings.
4.Once you’re logged into Windows see if you’re able to Fix Clock Watchdog Timeout Error on Windows 10.
Method 4: Run MEMTEST
1.Connect a USB flash drive to your system.
2.Download and install Windows Memtest86 Auto-installer for USB Key.
3.Right-click on the image file which you just downloaded and select “Extract here” option.
4.Once extracted, open the folder and run the Memtest86+ USB Installer.
5.Choose your plugged in USB drive, in order to burn the MemTest86 software (This will format your USB drive).
6.Once the above process is finished, insert the USB to the PC in which you’re getting the “Clock Watchdog Timeout Error“.
7.Restart your PC and make sure that boot from the USB flash drive is selected.
8.Memtest86 will begin testing for memory corruption in your system.
9.If you have passed all the test then you can be sure that your memory is working correctly.
10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means “Clock Watchdog Timeout Error” is because of bad/corrupt memory.
11.In order to Fix Clock Watchdog Timeout Error on Windows 10, you will need to replace your RAM if bad memory sectors are found.
Method 5: Run SFC and DISM
1.Press Windows Key + X then click on Command Prompt(Admin).
2.Now type the following in the cmd and hit enter:
Sfc /scannow sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)
3.Wait for the above process to finish and once done restart your PC.
4.Again open cmd and type the following command and hit enter after each one:
Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth
5.Let the DISM command run and wait for it to finish.
6. If the above command doesn’t work then try on the below:
Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).
7.Reboot your PC to save changes and see if you’re able to Fix Clock Watchdog Timeout Error on Windows 10.
Method 6: Update Device Drivers
In some cases, Clock Watchdog Timeout error can be caused due to outdated, corrupt or incompatible drivers. And to fix this issue you need to update or uninstall some of your essential device drivers. So first, Start your PC into Safe Mode using this guide then make sure to follow the below guide to update the following drivers:
- Network Drivers
- Graphics Card drivers
- Chipset Drivers
- VGA Drivers
Note: Once you Update the driver for any one of the above, then you need to Restart your PC and see if this fixes your problem, if not then again follow the same steps to update drivers for other devices and again restart your PC. Once you found the culprit for Clock Watchdog Timeout Error then you need to uninstall that particular device driver then update the drivers from Manufacturer’s website.
1.Press Windows Key + R then type devicemgmt.msc and hit Enter to open Device Manager.
2.Expand Display Adapter then right-click on your Video adapter and select Update Driver.
3.Select “Search automatically for updated driver software” and let it finish the process.
4.If the above step was able to fix your problem then very good, if not then continue.
5.Again select “Update Driver” but this time on the next screen select “Browse my computer for driver software.“
6.Now select “Let me pick from a list of available drivers on my computer.“
7.Finally, select the compatible driver from the list and click Next.
8.Reboot your PC to save changes.
Now follow the above method to update the drivers for Network Drivers, Chipset Drivers, and VGA Drivers.
Method 7: Update BIOS
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
1.The first step is to identify your BIOS version, to do so press Windows Key + R then type “msinfo32” (without quotes) and hit enter to open System Information.
2.Once the System Information window opens locate BIOS Version/Date then note down the manufacturer and BIOS version.
3.Next, go to your manufacturer’s website for e.g in my case it’s Dell so I will go to Dell website and then I will enter my computer serial number or click on the auto detect option.
4.Now from the list of drivers shown I will click on BIOS and will download the recommended update.
Note: Do not turn off your computer or disconnect from your power source while updating the BIOS or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.
5.Once the file is downloaded, just double click on the Exe file to run it.
6.Finally, you have updated your BIOS and this may also Fix Clock Watchdog Timeout Error on Windows 10.
Method 8: Repair Install Windows 10
This method is the last resort because if nothing works out then this method will surely repair all problems with your PC. Repair Install just uses an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.
Method 9: Roll Back to the previous build
1.Press Windows Key + I to open Settings then click on Update & Security.
2.From the left-hand menu click on Recovery.
3.Under Advanced startup click Restart Now.
4.Once the system boots into the Advanced startup, choose Troubleshoot > Advanced Options.
5.From Advanced Options screen, click “Go back to the previous build.“
6.Again click on “Go back to previous build” and follow the on-screen instructions.
- Fix Video TDR Failure (atikmpag.sys) in Windows 10
- Wacom Tablet Error: Your device is not connected to your computer
- Fix Your Windows License Will Expire Soon Error
- Fix Wacom Tablet Driver Not Found in Windows 10
That’s it you have successfully Fix Clock Watchdog Timeout Error on Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.