Being an electronic device, your Xbox controller can be customized to enhance your gameplay experience by adding trigger stops or increasing joystick sensitivity. And in case of damage resulting from rough usage, it is helpful to know how to take apart your Xbox controller using the necessary tools for a quick fix. Let’s explore the process of disassembling the controller in detail.
Table of Contents
How to Take an Xbox Controller Apart
This article will explore the ease or difficulty of disassembling an Xbox controller and the essential tools required. Let’s begin!
Quick Answer
Here’s a general guide on how to take apart an Xbox controller:
1. Remove the battery cover of your Xbox controller and take out the batteries.
2. Open the front and back halves of the controller using a prying tool.
3. Now, remove all screws from the back of the controller with a small Philips head screwdriver.
4. Disconnect the ribbon cable and lift the circuit board.
5. Remove all the remaining components using a plastic spudger.
Is It Easy to Take Apart an Xbox Controller?
Yes, it is easy to take apart an Xbox controller with the right method and tools. Taking apart a controller is generally not very difficult, but it does require some knowledge of electronics and some basic tools. If you have experience with electronics or have taken apart other controllers or devices, it may be relatively easy for you. Conversely, it may be a bit more challenging if you are new to working with electronics or have never taken apart a controller. Continue reading the article if you want to know how to do so.
Also Read: How Long Do Duracell Batteries Last in Xbox One Controller?
What Tool Do You Need to Take Xbox Controller Apart?
To disassemble the Xbox controller, you will require several tools. These include:
- Torx T6 and T8 screwdriver
- Small Philips head screwdriver
- Non-marring polymer prying tool resembling a guitar pick
- Plastic spudger
The screwdrivers are used to unscrew all the parts of the controller that are fastened tightly, while the prying tool separates the controller halves. Additionally, the spudger can be utilized to unplug cables and remove circuits. With these tools, you can easily replace buttons, bumpers, thumbsticks, or even the controller shells to suit your preferences.
What Screwdriver is Needed to Take Apart Xbox One Controller?
To take apart an Xbox One controller, you will need a small Philips head screwdriver or a Torx T6 or T8 screwdriver. The screws used in the Xbox One controller are typically size #00 Phillips screws, so a screwdriver designed for this size should work best. You can find both screwdrivers at most hardware stores or online retailers. It’s important to use the correct size screwdriver to avoid stripping or damaging the screws during disassembly.
Also Read: What Parts Are Needed to Build a Gaming PC?
How to Take an Xbox Controller Apart?
Follow these steps to take an Xbox controller apart:
Note 1: Taking apart your controller will void any warranty it may have. We suggest you proceed at your own discretion.
Note 2: Make sure to take a picture of the internal of your controller before you take it apart. It will help you in the reassembling process.
1. Gather a small Philips head screwdriver, a plastic spudger, and a prying tool like a guitar pick.
2. Turn over the controller and remove the battery cover.
3. Now, take out the batteries from the controller.
4. Then, take the prying tool and insert it into the halves of the controller.
5. Apply gentle pressure on the prying tool to take apart the front and back halves from the Xbox controller.
6. Now, use a small Philips head screwdriver and remove all the screws at the back of the controller.
7. Then, gently disconnect the ribbon cable by pulling on the plastic connector.
8. Now, lift the circuit board out of the controller shell carefully.
9. Finally, use the plastic spudger to remove the remaining components of the controller.
Recommended:
- How to Recover PUBG Account If Facebook is Disabled
- How to Make Your Discord Status Change Every 10 Seconds
- How to Fix a Button on Xbox One Controller
- How to Connect Hard Drive to Motherboard
By learning how to take an Xbox controller apart, you can fix any controller issues or modify the controller the way you want. If you have any questions or suggestions, please drop them in the comments section below for us to know. Your feedback and queries are valuable, and we encourage you to share what you want to learn about in our next article.
